Panasonic KX-FL511 Operating Guide
4. Fax
39
7
Press {DIRECTORY PROGRAM} to exit the
program.
program.
4.4.3 Erasing a stored entry from
the broadcast memory
the broadcast memory
1
Press {>}.
L
Confirm that there are no documents in
the document entrance.
the document entrance.
2
Press {A} or {B} repeatedly to display the
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
desired broadcast memory
(“<BROADCAST1>”, “<BROADCAST2>” or
“<MANUAL BROAD>”).
3
Press {DIRECTORY PROGRAM}.
4
Press {#}.
5
Press {A} or {B} repeatedly to display the
desired entry you want to erase.
desired entry you want to erase.
L
To cancel erasing, press {STOP}.
6
Press {SET}.
7
Press {SET}.
L
To erase other entries, repeat steps 5 to
7.
7.
8
Press {DIRECTORY PROGRAM} to exit the
program.
program.
4.4.4 Sending the same
document to pre-programmed
parties
document to pre-programmed
parties
1
Insert the document FACE DOWN.
2
3
Press the desired {BROADCAST} (1-2) or
{
{
MANUAL BROAD}.
L
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
scanned into memory. The unit will then
transmit the data to each entry, calling
each number sequentially.
L
After transmission, the stored document
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
will be erased automatically, and the unit
will automatically print a broadcast
sending report.
Note:
L
If you select “FINE”, “SUPER FINE”, “PHOTO”
or “PHOTO WITH TEXT” resolution, the
number of pages that the unit can transmit
will decrease.
or “PHOTO WITH TEXT” resolution, the
number of pages that the unit can transmit
will decrease.
L
If the document exceeds the memory
capacity, sending will be canceled.
capacity, sending will be canceled.
L
If one of the entries is busy or does not
answer, it will be skipped and redialed later
up to 2 times.
answer, it will be skipped and redialed later
up to 2 times.
To cancel broadcast transmission
1. Press {STOP} while the unit displays
“BROADCASTING”.
L
The display will show “SEND
CANCELED?
CANCELED?
”.
2. Press {SET}.
Receiving Faxes
4.5 Receiving a fax
manually
manually
4.5.1 Activating TEL mode
Set the fax machine to TEL mode by pressing
{
{
AUTO ANSWER} repeatedly to display the
following.
TEL MODE
L
The AUTO ANSWER light is OFF.
How to receive calls
1. When the unit rings, lift the handset to answer
the call.
2. When:
–
document reception is required,
–
a fax calling tone (slow beep) is heard, or
–
no sound is heard,
{
FAX START}
{
STOP}
OFF
KX-FL511.book Page 39 Thursday, December 21, 2006 10:21 AM