Panasonic KXFLB813EX Operating Guide
1. Introduction and Installation
21
1.8.2 Using the manual input tray
You can print not only on plain paper but also on
special media (transparencies / labels /
envelopes).
The manual input tray is used only for printing
with the computer (page 53) and can hold one
page at a time. When printing multiple pages,
add a next page after the first page has been fed
into the unit.
special media (transparencies / labels /
envelopes).
The manual input tray is used only for printing
with the computer (page 53) and can hold one
page at a time. When printing multiple pages,
add a next page after the first page has been fed
into the unit.
L
Please refer to page 94 for information on
recording paper.
recording paper.
1
Pull open the manual input tray (
1), and
then raise the extender (
2) gently until it
clicks into place.
2
Insert the paper, print-side down (
1) until
the unit grasps the paper and a single beep
is heard.
is heard.
L
Adjust the width of the guides (
2) to the
size of the recording paper.
Note:
L
If the paper is not inserted correctly, re-adjust
the paper, or the paper may jam.
the paper, or the paper may jam.
L
Make sure the unit grasps the recording
paper as specified in step 2. The display
shows the following.
paper as specified in step 2. The display
shows the following.
PAPER IN TRAY #2
FOR PC PRINTING
1.9 Handset unit
1
Connect the handset cord (
1) to the
handset and the handset cradle.
Load the recording paper after you have
started printing with the computer.
started printing with the computer.
1
2
1
2
1
FLB803-813EX-PFQX2433ZA-en.book Page 21 Tuesday, April 25, 2006 6:45 PM