Panasonic KXFLB813EX Operating Guide
4. Fax
32
4 Fax
Sending Faxes
4.1 Using the unit as a fax
machine
machine
4.1.1 Entering the fax mode
Before sending a fax, set the operation mode to
the fax mode.
the fax mode.
Press {FAX} to turn the {FAX} light ON.
Note:
L
You can change the default operation mode
(feature #463 on page 63) and the timer
before returning to the default operation
mode (feature #464 on page 63).
(feature #463 on page 63) and the timer
before returning to the default operation
mode (feature #464 on page 63).
L
Received documents will be stacked on the
lower output tray. You can change the output
tray for faxing (Feature #441 on page 67)
(KX-FLB813 only).
lower output tray. You can change the output
tray for faxing (Feature #441 on page 67)
(KX-FLB813 only).
4.2 Sending a fax manually
4.2.1 Using the auto document
feeder
feeder
L
Confirm that there are no documents on
the scanner glass.
the scanner glass.
1
If the {FAX} light is OFF, turn it ON by
pressing {FAX}.
pressing {FAX}.
2
Adjust the width of the document guides (
1)
to fit the actual size of the document.
3
Insert the document (up to 40 pages) FACE
UP into the feeder until a single beep is
heard.
UP into the feeder until a single beep is
heard.
L
If the document guides are not adjusted
to fit the document, re-adjust them.
to fit the document, re-adjust them.
4
If necessary, change the following settings
according to the type of document.
according to the type of document.
L
To select the resolution, see page 32.
L
To select the contrast, see page 33.
5
Press {MONITOR}.
6
Dial the fax number.
7
When a fax tone is heard:
Press {START}.
When the other party answers your call:
Lift the handset and ask them to press their
start button. When the fax tone is heard,
press {START}.
start button. When the fax tone is heard,
press {START}.
Note:
L
After pressing {START}, you can replace the
handset.
handset.
L
Any document which can be sent as a fax can
also be copied and scanned (page 34).
also be copied and scanned (page 34).
L
Do not open the document cover when
sending a fax with the auto document feeder.
sending a fax with the auto document feeder.
To stop sending
Press {STOP}.
To select the resolution
1. Press {RESOLUTION}.
2. Press {V} or {^} repeatedly to select the
desired resolution.
–
–
“
STANDARD”: For printed or typewritten
documents with normal-sized characters.
–
“
FINE”: For documents with small print.
–
“
SUPER FINE”: For documents with very
small print. This setting is effective only
when the other party has a compatible fax
machine.
when the other party has a compatible fax
machine.
–
“
PHOTO”: For documents containing
photographs, shaded drawings, etc.
L
Using the “
FINE”, “SUPER FINE” and
“
PHOTO” settings will increase transmission
time.
L
If the resolution setting is changed during
feeding, it will be effective from the next page.
feeding, it will be effective from the next page.
{
FAX}
{
FAX}
{
STOP}
{
START}
{
SET}{V}{^}
{
REDIAL}
{
MONITOR}
{
CONTRAST}
{
RESOLUTION}
{
QUICK SCAN}
1
FLB803-813EX-PFQX2433ZA-en.book Page 32 Tuesday, April 25, 2006 6:45 PM