Panasonic KXMB781 Operating Guide
1. Introduction and Preparation
9
Detailed operating instructions are on the CD-ROM, or can be viewed at www.panasonic.com/help
Connections and Setup
1.3 Connections
Caution:
L
When you operate this product, the power outlet
should be near the product and easily
accessible.
should be near the product and easily
accessible.
* The pictured model is KX-MB781.
Note:
L
If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB781 only).
telephone line, this unit may disturb the network
condition of the device (KX-MB781 only).
Using surge protectors
L
The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (
line surges or lightning. For additional protection, we
recommend using surge protectors (
9).
1.4 Dialing mode (KX-MB781
only)
only)
If you cannot dial, change this setting according to your
telephone line service.
telephone line service.
1
{
MENU} i {#}{1}{2}{0}
DIALING MODE
=TONE
[V^]
2
Press {1} or {2} to select the desired setting.
{
{
1} “
PULSE”: For rotary/pulse dial service.
{
2} “
TONE” (default): For tone dial service.
3
{
SET}
4
Press {MENU} to exit.
1.5 Selecting the operation mode
(Scan/Copy) (Fax: KX-MB781
only)
(Scan/Copy) (Fax: KX-MB781
only)
You can select the desired mode by pressing one of the
following buttons.
following buttons.
* The pictured model is KX-MB781.
–
–
{
SCAN}: Select this mode when using the unit as a
scanner for the computer.
–
{
COPY}: Select this mode when using the unit as a
copier.
–
{
FAX} (KX-MB781 only): Select this mode when
using the unit as a fax machine.
1 Power cord
L
Connect to a power outlet
(120 V, 60 Hz).
(120 V, 60 Hz).
2 Telephone line cord
L
Connect to a single telephone line jack (RJ11).
3 [EXT] jack
L
You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
extension telephone. Remove the stopper if
attached.
4 Answering machine (not included)
5 Handset unit (optional) connection jack
L
You can connect the optional handset unit.
Remove the seal if attached.
Remove the seal if attached.
6 Network router/Network hub (not included)
L
Also connect networked computers.
7 To the internet
8 LAN cable (not included)
L
To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
use only shielded LAN cable (category 5 straight
cable).
*1 KX-MB781 only
Important notice for the USB connection
L
Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 12).
the Multi-Function Station (page 12).
4
7
1
2
8
3
6
9
5
9
MB271-781-PFQW2640ZA-QRG-en.book Page 9 Tuesday, May 22, 2007 12:31 PM