Panasonic KXTG8561FX Operating Guide
Incoming call barring (Caller ID
subscribers only)
subscribers only)
This feature allows the unit to reject calls from
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
specified phone numbers that you do not want
to answer such as junk calls.
When a call is received, the unit does not ring
while the caller is being identified. If the phone
number matches an entry in the call barred
list, the unit sends out a busy tone to the
caller, and then disconnects the call.
Important:
R When the unit receives a call from a
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in the
call barred list.
Important:
R You must store the phone number with an
call barred list.
Important:
R You must store the phone number with an
area code in the call barred list.
n
From the caller list:
1
MFN ( )
2
MbN: Select the entry to be barred. a
a
3
MbN: “Caller Barred” a
4
MbN: “Yes” a
a M
N
n
By entering phone numbers:
1
(middle soft key) #217 a
2
Enter the phone number (24 digits
max.). a
R To erase a digit, press
max.). a
R To erase a digit, press
.
3
M
N
Viewing/editing/erasing bar call
numbers
numbers
1
(middle soft key) #217
2
MbN: Select the desired entry.
R To exit, press M
R To exit, press M
N.
3
To edit a number:
a Edit the phone number. a
a M
N
To erase a number:
a MbN: “Yes” a
a M
N
Note:
R When editing, press the desired dial key to
R When editing, press the desired dial key to
add,
to erase.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
(middle soft key) #256
2
Enter the base unit PIN (default: “0000”).
R If you forget your PIN, contact an
R If you forget your PIN, contact an
authorised service centre.
3
Select the handsets to be restricted by
pressing 1 to 6.
R All handsets registered to the base unit
pressing 1 to 6.
R All handsets registered to the base unit
are displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
the same dial key again. “ ”
disappears.
disappears.
4
5
5
Select a memory location by pressing 1
to 6. a
to 6. a
6
Enter the phone number or area code to
be restricted (8 digits max.). a
be restricted (8 digits max.). a
a
M
N
R To erase a restricted number, press
.
Changing the base unit PIN
(Personal Identification Number)
(Personal Identification Number)
Important:
R If you change the PIN, please make note of
R If you change the PIN, please make note of
your new PIN. The unit will not reveal the
35
Programming
TG8551_61FX_(en-en)_0427_ver021.35 35
2012/04/27 20:24:46