Panasonic KXTG8561FX Operating Guide
6
Enter a text memo (30 characters max.;
page 54). a
page 54). a
7
MbN: Select the desired alarm tone. a
2 times
R You can select “Off” if you prefer not
to hear an alarm tone.
R We recommend selecting a different
ringer tone from the one used for
outside calls.
outside calls.
R To add other entries, repeat from step
8
M
N
Note:
R To stop the alarm, press
R To stop the alarm, press
or place the
handset on the base unit or charger.
R When the handset is in use, the alarm will
not sound until the handset is in standby
mode.
mode.
Viewing entries
1
(middle soft key) a
a
2
To see the entries on the selected date,
press
press
.
To see the schedule list, press
.
R You can see detailed information
about the schedule by pressing
.
Editing an entry
1
(middle soft key) a
a
2
a MbN: Select the desired entry.
3
a MbN: “Edit” a
4
Edit the date if necessary. a
5
Edit the time if necessary. a
6
Edit the text memo if necessary (30
characters max.; page 54). a
characters max.; page 54). a
7
MbN: Select the desired alarm tone. a
2 times
8
M
N
Erasing an entry
Schedule alarm entries are not erased
automatically after the schedule alarm sounds.
Erase unwanted entries.
automatically after the schedule alarm sounds.
Erase unwanted entries.
1
(middle soft key) a
a
2
a MbN: Select the desired entry.
3
a MbN: “Erase” a
4
MbN: “Yes” a
5
M
N
Erasing all entries
1
(middle soft key) a
a
2
a
3
MbN: “Erase All” a
4
MbN: “Yes” a
5
MbN: “Yes” a
6
M
N
Baby monitor
This feature allows you to listen in on a room
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
where another handset is located, allowing
you to easily monitor from different areas of
the house or place. The monitored handset
(placed in a baby’s room, for example) will
automatically call the monitoring handset or
the phone number stored when it detects
sound.
Important:
R You should perform a test run of the baby
monitor procedure to ensure that the baby
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
monitor feature is set correctly. For
example, test its sensitivity. Check the
connection if you are diverting the baby
monitor to an outside line.
Note:
R Both the monitored and monitoring
R Both the monitored and monitoring
R If the unit is connected to a PBX system,
you cannot set the baby monitor.
37
Programming
TG8551_61FX_(en-en)_0427_ver021.37 37
2012/04/27 20:24:47