Panasonic KXMB781 Operating Guide

Page of 96
11. Help
65
For assistance, please visit http://www.panasonic.com/help
NO FAX REPLY”
L
The other party’s fax machine is busy or has run out of recording paper. Try 
again.
OUT OF PAPER INPUT TRAY 
#2”
L
Recording paper is not installed in the manual input tray. Install paper (page 
26).
PAPER JAMMED”
OPEN TOP COVER”
L
A recording paper jam occurred. Remove the jammed paper (page 74).
PC FAIL OR BUSY”
L
The cable or the computer power cord is not connected correctly. Check the 
connections (page 15, 22).
L
The software is not running on the computer. Restart the software and try 
again.
PLEASE WAIT”
L
The unit is warming up. Wait for a while.
REDIAL TIME OUT”
L
The other party’s fax machine is busy or has run out of recording paper. Try 
again.
REMOVE DOCUMENT”
L
The document is jammed. Remove the jammed document (page 79).
L
Attempted to send or copy a document longer than 600 mm (23
5
/
8
") using 
the auto document feeder. Press {STOP} to remove the document. Divide 
the document into two or more sheets and try again.
REMOVE PAPER IN INPUT 
TRAY #2”
L
The recording paper is installed in the manual input tray when trying to copy, 
receive faxes or print reports. Remove the recording paper from manual 
input tray.
REPLACE DRUM CHANGE 
SUPPLIES”
L
The drum unit’s service life is finished. Replace the drum unit immediately.
RX MEMORY FULL”
L
The memory is full of received documents due to a lack of recording paper 
or a recording paper jam. Install paper (page 13) or remove the jammed 
paper (page 74).
L
If feature #442 is set to 
ALWAYS” (page 54), check the connection between 
the computer and the unit.
TONER EMPTY”
CHANGE SUPPLIES”
L
The toner’s service life is finished. Replace the toner cartridge immediately.
TONER LOW”
CHANGE SUPPLIES”
L
The toner’s service life is near to an end. Replace the toner cartridge as 
soon as possible.
TOP COVER OPEN”
L
The top cover is open. Close it.
TRANSMIT ERROR”
L
A transmission error occurred. Try again.
WARMING UP”
L
The inside of the unit is cold. Let the unit warm up. Wait for a while.
WRONG PAPER”
L
The fax message was printed on paper which is shorter than letter size 
paper. Use the appropriate size paper (page 85).
Display
Cause & Solution