Panasonic S-ICX Manual

Page of 329
Section 700 - Operation
Chapter 3. System Features
S-ICX-45-700
S-ICX (International) issued June 2000
 59
Considerations
N/A
Day 1/ Day 2/Night Delayed Ringing
Delayed Ringing causes an incoming outside call that is unanswered at a primary extension within a 
certain period of time, to ring at a designated extension or extensions. Delayed ringing destinations 
can be set for Day 1, Day 2 and Night modes. trunk Delayed Ringing is also available for hunt group 
pilot numbers.
Hardware Requirements
N/A
Considerations
N/A
DDI (DID) Day/Night Ringing
(Note: Analog DID is not available in the UK, TX or EX model).
Incoming DDI calls can be set to ring at day destinations when the system is in day mode and ring at 
night destinations when the system is in night mode.
Hardware Requirements
DDI (DID) Trunk Card
Considerations
N/A
DDI (DID) Day/Night Busy/Delayed Ringing
DDI Day/Night Busy/Delayed Ringing causes an incoming DDI call to a busy primary extension to 
ring at a designated extension or extensions. DDI Busy/Delayed Ringing also causes an incoming 
DDI call that is unanswered at a primary extension within a certain period of time, to ring at a 
designated extension or extensions. Separate ring destinations are available for day and night modes.
DDI Busy/Delayed Ringing is also available for hunt group pilot numbers. However, when the 
Queuing Timer expires, the call leaves the hunt group and is forwarded to the DDI Busy/Delayed 
Ringing destination.
Hardware Requirements
N/A
Considerations
Call Forwarding takes priority over DDI Busy/Delayed Ringing
If the call is part of a hunt group and the Queuing Timer expires, the call is forwarded to the DDI 
Busy/Delay Ringing destination. (See “DDI (DID) Day/Night Busy/Delayed Ringing” on page 
59.)
Busy Lamp Field Ringing
Extensions that have Direct Station Select (DSS)/BLF FF keys assigned may be set to ring on those 
keys.