Panasonic KXTG2521FX Operating Guide

14

{V}

/{^}: “Select Language” i 

{j

/OK}

{V}

/{^}: Select your desired 

language. i {j/OK} i {ic}

Note:
L

If you select a language you cannot 
read: {ic} i {j/OK} i
{^}

 3 times i {j/OK} i

{V}

 2 times i {j/OK} 2 times i

{V}

/{^}: Select your desired 

language. i {j/OK} i {ic}

If you cannot make calls, change this 
setting according to your telephone line 
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.

{j

/OK}

{V}

/{^}: “Base Unit Setup” i 

{j

/OK}

{V}

/{^}: “Dial Mode” i 

{j

/OK}

{V}

/{^}: Select the desired setting. 

i

 {j/OK} i {ic}

{j

/OK}

{V}

/{^}: “Handset Setup” i 

{j

/OK}

{V}

/{^}: “Set Date & Time” i 

{j

/OK}

Enter the current date, month, and 
year.
Example: 15 July, 2010
{

1}{5} {0}{7} {1}{0}

Enter the current hour and minute.
Example: 9:30
{

0}{9} {3}{0}

L

You can select 24-hour or 12-hour 
clock format (“AM” or “PM”) by 
pressing {*}.

{j

/OK} i {ic}

Note:
L

To correct a digit, press {<} or {>} to 
move the cursor to the digit, then 
make the correction.

L

The date and time may be incorrect 
after a power failure. In this case, set 
the date and time again.

When the handset is on the base unit, 
the base unit transmission power is 
reduced up to 99.9% if only one handset 
is registered.
Even when the handset is not on the 
base unit or several handsets are 
registered, the base unit transmission 
power in standby mode can be reduced 
up to 90% by activating one touch eco 
mode.
You can turn on/off one touch eco mode 
by just pressing {ECO/R}. The default 
setting is “Normal”.
– When the one touch eco mode is on: 

“Low” is temporarily displayed and 
“ECO” is shown on the handset 
display.

– When the one touch eco mode is off: 

“Normal” is temporarily displayed 
and “ECO” goes off from the handset 
display.

Note:
L

When there is another cordless phone 
nearby and it is in use, the base unit 
transmission power may not be 
reduced.

L

Activating one touch eco mode 
reduces the range of the base unit in 
standby mode.

L

If you set the repeater mode to “On” 
(page 22), one touch eco mode is 
cancelled.

TG2511_21FX(e).book  Page 14  Tuesday, February 2, 2010  3:08 PM