Panasonic KXTG2521FX Operating Guide

Page of 44
Programming
22
Special programming
Changing the unit’s region 
setting/Resetting the base 
unit
1
{j
/OK}
2
{V}
/{^}: “Base Unit Setup” i 
{j
/OK}
3
{V}
/{^}: “Country” i {j/OK}
4
{V}
/{^}: Select the desired country. 
i
 {j/OK}
5
{V}
/{^}: “Yes” i {j/OK} i 
{i
c}
Note:
L
The following items will be deleted or 
reset to their default settings:
– Base unit settings (page 20)
– Answering system settings
(KX-TG2521, page 19)
– One touch eco mode (page 14)
– Caller list
– Voice mail messages
L
The following items will be retained:
– Date and time
– Repeater mode
– Recordings, including your greeting 
message and caller messages
(KX-TG2521)
– Call screening (KX-TG2521)
L
If you select the desired country in 
step 4, the following default settings 
will be changed for the selected 
country’s default settings:
– Recall/flash time (page 20)
– Display language (page 20)
L
According to your country selection in 
step 4, the answering system 
announcement language changes as 
follows (KX-TG2521):
L
After changing the unit’s region 
setting/resetting the base unit, w 
flashes on the handset momentarily. 
This is normal and the handset can be 
used once w stops flashing.
Increasing the range of the 
base unit
You can increase the signal range of the 
base unit by using a DECT repeater. 
Please use only the Panasonic DECT 
repeater noted on page 4. Contact your 
Panasonic dealer for details.
Important:
L
Before registering the repeater to this 
base unit, you must turn the repeater 
mode on.
L
Do not use more than one repeater at 
a time.
Setting the repeater mode
1
{j
/OK}
2
{V}
/{^}: “Base Unit Setup” i 
{j
/OK}
3
{V}
/{^}: “Repeater Mode” i 
{j
/OK}
4
{V}
/{^}: Select the desired setting. 
i
 {j/OK} i {ic}
Note:
L
After turning the repeater mode on or 
off, w flashes on the handset 
momentarily. This is normal and the 
handset can be used once w stops 
flashing.
Czech
Slovakia
countries
except Czech and Slovakia
Czech
Slovak
-
-
English
-
TG2511_21FX(e).book  Page 22  Tuesday, February 2, 2010  3:08 PM