Panasonic KXFL511E Instruction Manual

FAX RING COUNT
RINGS=2

[

±]

To change the number of rings before the unit 
answers a call in FAX ONLY mode.
You can select “1”, “2” (default), “3”, “4”, “5”, “6”, 
“7”, “8” or “9”. If you are using the unit with an 
answering machine, set to more than 4 (page 
33).

REMOTE TAM ACT.
=OFF

[

±]

If you are using the unit with an answering 
machine, activate this feature, and program the 
remote activation ID to enable remote operation 
of the answering machine.

1. Press {MENU}.

2. Press {#} then {1}{2}.

3. Press {A} or {B} repeatedly to select “ON”.

4. Press {SET}.

5. Enter your ID from 1 to 5 digits, using 0–9, 

{*}

 and {#}.

L

The default ID is “11”.

6. Press {SET}.

7. Press {MENU}.

RINGER PATTERN
=A

[

±]

You can select “A” (default), “B” or “C”.

AUTO JOURNAL
=ON

[

±]

“ON” (default): The unit will print a journal report 
automatically after every 30 new fax 
communications (page 28).
“OFF”: The unit will not print a journal report, but 
will keep a record of the last 30 fax 
communications.

OVERSEAS MODE
=ERROR

[

±]

If you have difficulty sending an overseas fax, 
activate this feature before starting transmission.

L

This feature is not available for broadcast 
transmission.

L

The calling charge may be higher as the 
transmission speed is slowed down.

“NEXT FAX”: This setting is effective only for the 
next attempted fax transmission. After 
transmission, the unit will return to the previous 
setting.
“ERROR” (default): When the previous fax 
transmission fails and you wish to re-send the 
document automatically.
“OFF”: Deactivates this feature.

DELAYED SEND
=OFF

[

±]

This feature allows you to take advantage of low-
cost calling hours offered by your telephone 
company. This feature can be set up to 24 hours 
in advance of the desired time.
To send a document:

1. Insert the document.

2. Press {MENU}.

3. Press {#} then {2}{5}.

4. Press {A} or {B} repeatedly to select “ON”.

5. Press {SET}.

6. Enter the fax number.

7. Press {SET}.

8. Enter the transmission start time.

L

Press {*} repeatedly to select “AM” or 
“PM”.

9. Press {SET}.

L

To cancel after programming, press {STOP} 
then {SET}.

AUTO CALL. LIST
=ON

[

±]

“ON” (default): The unit will print the Caller ID list 
automatically after every 30 new calls (page 24).
“OFF”: The unit will not print the Caller ID list, but 
keep a record of the information for the last 30 
callers.

AUTO REDUCTION
=ON

[

±]

To receive a fax document that is longer than 
your recording paper.

FL511E.book  Page 38  Monday, June 30, 2003  5:55 PM