Panasonic KXTCD290E Operating Guide

27

Helpline Tel. No.: U.K. 08700 100 076  R.O.I. 01289 8333

L

If you select one of the melody ringtones, the 
ringtone will continue to sound for several 
seconds if the caller hangs up before you 
answer. You may hear a dial tone or no one on 
the line when you answer a call.

L

The preset melodies in this product are used 
with permission of © 2004 M-ZoNE Co., Ltd.

Night mode allows you to select a block of time 
during which the handset will not ring for outside 
calls. This feature is useful for times when you do 
not want to be disturbed, for example, while 
sleeping. Night mode can be set independently 
for the handset and the base unit (page 32).
Using the handset phonebook’s category feature 
(page 19), you can also select categories of 
callers whose calls will override night mode and 
ring the handset (Caller ID subscribers only).
Set the date and time beforehand (page 14).

Press {j/OK}.

Select “Handset Setup”, then press {>}.

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “Start/End”, then press {>}.

Enter the desired hour and minute you wish 
to start this feature by selecting 2 digits for 
each.

L

If you use 12-hour time entry, select “AM” 
or “PM” by pressing {*} repeatedly 
before entering the time.

Enter the desired hour and minute you wish 
to end this feature by selecting 2 digits for 
each.

L

If you use 12-hour time entry, select “AM” 
or “PM” by pressing {*} repeatedly 
before entering the time.

Press {j/OK}.

Press {ih}.

Press {j/OK}.

Select “Handset Setup”, then press {>}.

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “On/Off”, then press {>}.

Select “On” or “Off”, then press {>}.

Press {ih}.

L

When the night mode is turned on, “[N]” is 
displayed.

Setting the ring delay for night mode
This setting allows the handset to ring during 
night mode if the caller waits long enough. After 
the selected amount of time passes, the handset 
will ring, useful when someone urgently needs to 
speak with you. If you select “No Ringing”, the 
handset will not ring during night mode.

Press {j/OK}.

Select “Handset Setup”, then press {>}.

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “Ring Delay”, then press {>}.

Select the desired setting, then press {>}.

Press {ih}.

Press {j/OK}.

Select “Handset Setup”, then press {>}.

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “Select Category”, then press 
{>}

.