Panasonic KXTCD290E Operating Guide

32

Helpline Tel. No.: U.K. 08700 100 076  R.O.I. 01289 8333

Press {j/OK}.

Select “Base Unit Setup”, then press 
{>}

.

Enter “0000” (default base unit PIN).
L

If you changed the PIN, enter it (page 34).

Select “Ringer Setup”, then press {>}.

Select “Ringer Volume”, then press {>}.

Press {e} or {v} repeatedly to select the 
desired volume.

Press {>}.

Press {ih}.

Night mode allows you to select a block of time 
during which the base unit will not ring for outside 
calls. This feature is useful for times when you do 
not want to be disturbed, for example, while 
sleeping. Night mode can be set independently 
for the handset (page 27) and the base unit.
Set the date and time beforehand (page 14).

Press {j/OK}.

Select “Base Unit Setup”, then press 
{>}

.

Enter “0000” (default base unit PIN).
L

If you changed the PIN, enter it (page 34).

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “Start/End”, then press {>}.

Enter the desired hour and minute you wish 
to start this feature by selecting 2 digits for 
each.

L

If you use 12-hour time entry, select “AM” 
or “PM” by pressing {*} repeatedly 
before entering the time.

Enter the desired hour and minute you wish 
to end this feature by selecting 2 digits for 
each.

L

If you use 12-hour time entry, select “AM” 
or “PM” by pressing {*} repeatedly 
before entering the time.

Press {j/OK}.

Press {ih}.

Press {j/OK}.

Select “Base Unit Setup”, then press 
{>}

.

Enter “0000” (default base unit PIN).
L

If you changed the PIN, enter it (page 34).

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “On/Off”, then press {>}.

Select “On” or “Off”, then press {>}.

Press {ih}.

Setting the ring delay for night mode
This setting allows the base unit to ring during 
night mode if the caller waits long enough. After 
the selected amount of time passes, the base unit 
will ring, useful when someone urgently needs to 
speak with you.
If you select “No Ringing”, the base unit will 
not ring during night mode.

Press {j/OK}.

Select “Base Unit Setup”, then press 
{>}

.

Enter “0000” (default base unit PIN).
L

If you changed the PIN, enter it (page 34).

Select “Ringer Setup”, then press {>}.

Select “Night Mode”, then press {>}.

Select “Ring Delay”, then press {>}.

Select the desired setting, then press {>}.

Press {ih}.