Panasonic PV-DF2703 Operating Guide

*Important:  If a remote control button does not work when pressed, press the 

, DVD button 

on the remote and try the button again.

• Make settings according to amplifi er 

connected to optical audio output as shown 
in above table.

*1  When connecting an amplifi er (with an 

optical digital input connector) which 
does not contain the Dolby Digital or 
dts decoder, be sure to select “

PCM

.” 

If “Bitstream” is selected, starting DVD 
play may cause such a high level of noise 
as to be harmful to your ears and damage 
the speakers.

*2  When a dts decoder is connected, please 

select “Bitstream” in “dts.” If “PCM” is 
selected, there will be 

stereo sound.

Select the digital output to be output from the optical 
digital audio output connector of the unit.

■

OFF: 

Linear PCM of less than 48 kHz/16 bit 
is output. When playing DVDs recorded 
in linear PCM of over 48 kHz/20 bit, no 
digital audio is output. (Factory preset)

PCM:  

When playing DVDs recorded in 
linear PCM of 48 kHz/20 bit/24 bit or 
more, digital audio converted to 44.1 
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted 
to48 kHz/16 bit or below for copyright 
protection.)

■

Bitstream:  Dolby Digital bitstream (1ch-5.1ch) is 

output. (Factory preset)

PCM: 

When you have connected a amplifi er 
that doesn’t have a built-in Dolby Digital 
decoder.

■

Bitstream:  dts bitstream is output. (Factory preset)
PCM: 

When you have connected a amplifi er 
that doesn’t have a built-in dts decoder.

■

OFF: 

Normal audio range is selected. (Factory 
preset)

ON: 

For dynamic sound even at low volume, 
this is useful for late-night listening. 
[Dolby Digital DVDs only].

1) Press      to select 

an item.

repeatedly for 
output. (See 
below.)

1) Press     to select 

“AUDIO OUTPUT.”

2) Press SET to 

display screen. 

Press ACTION to redisplay 

DVD MAIN MENU

 

and go to step 2 to setup another item. Or, 
press ACTION three times to exit.

AUD I O  OUTPUT

SELECT

:  

SET

: SET

END

: ACT I ON

LPCM(DVD)

: OFF

D o l b y     D i g i t a l

:  B i t s t r e a m

d t s

:  B i t s t r e a m

DRC

: OFF

DVD  MAIN  MENU

SELECT

:  

SET

: SET

END

: ACT I ON

D I SC  LANGUAGES

AUDIO  OUTPUT

ST I L L   MODE

: AUTO

TV  MODE

: 

4 : 3   Pa n   &   S c a n

LPCM
(DVD)

Dolby

Digital

dts

No amplifi er 
is connected

AV amplifi er 
without Dolby 
Digital/dts 
decoder

PCM

PCM*

1

PCM*

1

AV amplifi er 
including 
Dolby Digital 
decoder

PCM

Bitstream

PCM

AV amplifi er 
including 
Dolby 
Digital/dts 
decoder 

PCM

Bitstream Bitstream

*

2