Panasonic PV-DF2703 Guia De Utilização

Página de 80
61
Ad
vanced Operation
*Important:  If a remote control button does not work when pressed, press the 
, DVD button 
on the remote and try the button again.
• Make settings according to amplifi er 
connected to optical audio output as shown 
in above table.
*1  When connecting an amplifi er (with an 
optical digital input connector) which 
does not contain the Dolby Digital or 
dts decoder, be sure to select “
PCM
.” 
If “Bitstream” is selected, starting DVD 
play may cause such a high level of noise 
as to be harmful to your ears and damage 
the speakers.
*2  When a dts decoder is connected, please 
select “Bitstream” in “dts.” If “PCM” is 
selected, there will be 
stereo sound.
AUDIO OUTPUT
Select the digital output to be output from the optical 
digital audio output connector of the unit.
Do steps 1 and 2 on page 60.
  “LPCM (DVD)” selections
OFF: 
Linear PCM of less than 48 kHz/16 bit 
is output. When playing DVDs recorded 
in linear PCM of over 48 kHz/20 bit, no 
digital audio is output. (Factory preset)
PCM:  
When playing DVDs recorded in 
linear PCM of 48 kHz/20 bit/24 bit or 
more, digital audio converted to 44.1 
kHz/16 bit or 48 kHz/16 bit is output.
(Digital output of PCM audio is restricted 
to48 kHz/16 bit or below for copyright 
protection.)
  “Dolby Digital” selections
Bitstream:  Dolby Digital bitstream (1ch-5.1ch) is 
output. (Factory preset)
PCM: 
When you have connected a amplifi er 
that doesn’t have a built-in Dolby Digital 
decoder.
 “dts” selections
Bitstream:  dts bitstream is output. (Factory preset)
PCM: 
When you have connected a amplifi er 
that doesn’t have a built-in dts decoder.
  “DRC (Dynamic Range Compression)” 
selections
OFF: 
Normal audio range is selected. (Factory 
preset)
ON: 
For dynamic sound even at low volume, 
this is useful for late-night listening. 
[Dolby Digital DVDs only].
1) Press      to select 
an item.
2)  Press SET  
repeatedly for 
output. (See 
below.)
1) Press     to select 
“AUDIO OUTPUT.”
2) Press SET to 
display screen. 
1
3
2
4
Press ACTION to redisplay 
DVD MAIN MENU
 
and go to step 2 to setup another item. Or, 
press ACTION three times to exit.
AUD I O  OUTPUT
SELECT
:  
SET
: SET
END
: ACT I ON
LPCM(DVD)
: OFF
D o l b y     D i g i t a l
:  B i t s t r e a m
d t s
:  B i t s t r e a m
DRC
: OFF
DVD  MAIN  MENU
SELECT
:  
SET
: SET
END
: ACT I ON
D I SC  LANGUAGES
AUDIO  OUTPUT
ST I L L   MODE
: AUTO
TV  MODE
4 : 3   Pa n   &   S c a n
Type of 
amplifi er 
to be 
connected
Recommended setting
LPCM
(DVD)
Dolby
Digital
dts
No amplifi er 
is connected
AV amplifi er 
without Dolby 
Digital/dts 
decoder
PCM
PCM*
1
PCM*
1
AV amplifi er 
including 
Dolby Digital 
decoder
PCM
Bitstream
PCM
AV amplifi er 
including 
Dolby 
Digital/dts 
decoder 
PCM
Bitstream Bitstream
*
2
SELECT
      
SET
ACTION