Panasonic KXFL611E Operating Guide
6. Programmable Features
43
6.3 Advanced features
Code #22: Setting the journal report to print
automatically
automatically
AUTO JOURNAL
=ON
[
±]
“
ON” (default): The unit will print a journal report
automatically after every 30 new fax
transmissions and receptions (page 31).
“
transmissions and receptions (page 31).
“
OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax transmissions
and receptions.
and receptions.
Code #23: Sending documents overseas
OVERSEAS MODE
=ERROR
[
±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
number is correct and the line is connected,
activate this feature before sending the fax.
This feature improves the reliability by reducing
the transmission speed.
“
NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
transmission, the unit will return to the previous
setting.
“
ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“
document.
“
OFF”: Deactivates this feature.
Note:
L
This feature is not available for broadcast
transmission.
transmission.
L
Calling charges may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
=OFF
[
±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {RESOLUTION}
repeatedly to select the desired resolution
(page 30).
(page 30).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select “
ON”.
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L
Press {*} to select “
AM” or “PM”.
10. Press {SET}.
L
To cancel after programming, press {STOP}
then {SET}.
then {SET}.
Code #26: Setting the Caller ID list to be
printed automatically
printed automatically
AUTO CALL. LIST
=ON
[
±]
“
ON” (default): The unit will print the Caller ID list
automatically after every 30 new calls (page 27).
“
“
OFF”: The unit will not print the Caller ID list, but
will keep records of the information for the last 30
callers.
callers.
Code #30: Changing the silent fax
recognition ring setting
recognition ring setting
SILENT FAX RING
RINGS=3
[
±]
To change the number of times the unit rings
while in TEL/FAX mode. You can select “
while in TEL/FAX mode. You can select “
3”
(default), “
4”, “5”, “6”, “7”, “8” or “9”. See
page 36 for details.
Code #37: Receiving other size documents
AUTO REDUCTION
=ON
[
±]
To receive a fax document that is longer than
your recording paper.
“
your recording paper.
“
ON” (default): The unit will fit received
documents onto your recording paper.
“
“
OFF”: The unit will print the original size.
Code #39: Changing the display contrast
LCD CONTRAST
=NORMAL
[
±]
“
NORMAL” (default): For normal contrast.
“
DARKER”: Used when the display contrast is too
light.
Code #41: Changing the fax activation code
FAX ACTIVATION
=ON
[
±]
If you wish to use an extension telephone to
receive faxes, activate this feature and program
the activation code.
receive faxes, activate this feature and program
the activation code.
1. Press {MENU}.
2. Press {#}, then {4}{1}.
3. Press {A} or {B} repeatedly to select “
ON”.
4. Press {SET}.
FL611E-PFQX2133ZA-en.book Page 43 Friday, January 28, 2005 11:12 AM