Panasonic RRUS310E Operating Guide
FOLDER
VQT4R68
17
17
ENGLISH
When VAS (Voice Activated System) is set, if silence continues for approx. 2 seconds during recording,
the recording is paused automatically.
the recording is paused automatically.
●
For important recording, set the VAS setting to “
”.
●
Using the LOW CUT FILTER will cut low frequency sound and VAS recording may not be
performed properly. In this case, cancel the LOW CUT FILTER setting. (
performed properly. In this case, cancel the LOW CUT FILTER setting. (
➜ page16)
●
If [* REC] is pressed while VAS recording is being paused, the unit will enter normal recording
pause state and only “VAS” will light up.
pause state and only “VAS” will light up.
Preventing unnecessary recording (VAS)
• When the unit is not in the stop state, press
[g STOP/RETURN].
1
Press [MENU/FOLDER].
2
Press u, i to select “VAS” and
press [q OK].
press [q OK].
3
Press +, – to select “
” and press
[q OK].
(The factory setting is “
”.)
To exit the setting screen, press
[g STOP/RETURN].
[g STOP/RETURN].
“VAS” is displayed.
To start VAS recording, press [* REC].
If silence continues for approx. 2 seconds during
VAS recording, the recording is paused. Then,
the recording indicator, “VAS” and “*” will blink.
VAS recording, the recording is paused. Then,
the recording indicator, “VAS” and “*” will blink.
Adjusting the VAS operation level:
Press u, i during VAS recording.
(The factory setting is “
(The factory setting is “
”.)
●
You can adjust the sound detection level from
1 to 5.
1 to 5.
●
If the sound to record is low, increase the VAS
value (sensitivity level). If the sound is loud,
decrease the VAS value.
value (sensitivity level). If the sound is loud,
decrease the VAS value.