Panasonic DP-8060 Operating Guide

41

■

■

■

■

■ Locations/User Error Codes (J Codes)

J19

Paper Feed Section and ADU Section

J29

System Console Section

J82, J83, ADU Section and Fuser/Exit Section
J84, J85,

J88

J30, J31, Paper Feed Section and Fuser/Exit Section

J40,

J42-J45

J41, J50, Fuser/Exit Section and Paper
J51, J52, Transport  Section

J53, J86

J80, J81, Fuser/Exit Section

J87

J54-J55 Paper Transport Section

J60-J64 Optional Finisher Section

J70-J79 ADF Section

J92-J94

J00

Sheet Bypass (Remove the misfed paper,
and then open and close the cover)

J01, J17, Paper Tray 1 and Paper Feed Section

J21

(Paper Tray 1-4 and Sheet Bypass)

J02, J22 Paper Tray 2 and Paper Feed Section

(Paper Tray 2)

J03, J23 Paper Tray 3 and Paper Feed Section

(Paper Tray 2-4)

J04, J24 Paper Tray 4 and Paper Feed Section

(Paper Tray 3, 4)

J07, J08, Paper Feed Section
J09, J27, (Paper Tray 2 and Optional Paper Tray 3

J28

and 4)

J06,  J16, LCT Section

J26

Paper Feed Section

J18, J33 Paper Feed Section

(Paper Tray 1-4 and Sheet Bypass)
Verify that the media type selection in the
control panel matches the media loaded on
the trays.
Ex: Select "Transparency" when Transparencies

are loaded in the Sheet Bypass

H: Finisher (See pages 48-50)
 I: Saddle-Stitch Finisher (See pages 51-52)

J: i-ADF (See page 53)

A: System Console (See page 42)
B: Paper Entry Area (See page 43)
C: Paper Transport Area (See page 44)
D: Paper Exit/Fuser Area (See page 45)
E: ADU Area (See page 46)
F: Reverse Area (See page 47)
G: 3000-Sheet Tray (LCT) Area (See page 47)

● The display indicates the section of the

misfed paper. Remove the misfed paper
and check to see if the misfed location
indicator has been cleared. If other
locations indicate presence of paper,
remove them and check the display again.

● If an unknown error code appears, or

cannot clear the error codes, switch off
the machine and contact the authorized
Panasonic dealer.

Misfed Indicator
● Indicates to open each cover, check

and remove any misfed paper.