Panasonic UF5600 Operating Guide
Customizing Your Machine
42
Fax Parameter Table
133
JOB BUILD
1
OFF
Selecting whether the machine performs Job Build when
the total number of documents exceeds the maximum
capacity of the ADF, or when scanning the documents
manually one at a time. If you place the documents on the
ADF within 5 seconds after the ADF scan, the ADF scan
will continue for the current scan. (Maximum number of
scanning sheets is 255 pages for one job.)
The Quick Memory Transmission feature (Fax Parameter
No. 82) is not available when the Job Build is set to
"2:ON".
Up to 250 pages can be stored. When the number of
pages exceeds 255, the memory overfull message will be
displayed. Select “Yes“ to start transmitting, or “No“ to
cancel.
If no action is taken within 5 seconds, the machine will
start transmitting the stored originals.
the total number of documents exceeds the maximum
capacity of the ADF, or when scanning the documents
manually one at a time. If you place the documents on the
ADF within 5 seconds after the ADF scan, the ADF scan
will continue for the current scan. (Maximum number of
scanning sheets is 255 pages for one job.)
The Quick Memory Transmission feature (Fax Parameter
No. 82) is not available when the Job Build is set to
"2:ON".
Up to 250 pages can be stored. When the number of
pages exceeds 255, the memory overfull message will be
displayed. Select “Yes“ to start transmitting, or “No“ to
cancel.
If no action is taken within 5 seconds, the machine will
start transmitting the stored originals.
2
ON
135
JUNK FAX FILTER
Function to prevent direct mail FAX and unnecessary FAX
messages.
messages.
1. JUNK FAX FILTER
When set to “VALID”, the machine will not receive the
faxes from the senders whose numeric ID has been
registered as junk fax number. The denied number IDs
can be registered in "4.ID NO. REGISTRATION".
faxes from the senders whose numeric ID has been
registered as junk fax number. The denied number IDs
can be registered in "4.ID NO. REGISTRATION".
1
INVALID
2
VALID
2. RCV WITHOUT ID
When set to “VALID”, the machine will receive the faxes
from senders without numeric ID registered.
(This setting is available only when "1. JUNK FAX
FILTER" is set to "VALID".)
from senders without numeric ID registered.
(This setting is available only when "1. JUNK FAX
FILTER" is set to "VALID".)
1
INVALID
2
VALID
3. RECEIVED ID PRINT
When set to “VALID”, the sender’s numeric ID and
received time are printed at the bottom of the received
faxes. If the sender’s numeric ID is not registered, only the
received time is printed. (This setting is available only
when “1. JUNK FAX FILTER” is set to “VALID”.)
received time are printed at the bottom of the received
faxes. If the sender’s numeric ID is not registered, only the
received time is printed. (This setting is available only
when “1. JUNK FAX FILTER” is set to “VALID”.)
1
INVALID
2
VALID
4. ID NO.
REGISTRATION
REGISTRATION
(NO. 01-30)
Register fax numbers as junk fax number.
Up to 30 fax numbers can be registered for junk fax
number. (Including numerals “0-9”, blank space, and +
symbol.) (When comparing the sender's numeric ID to the
registered junk fax numbers, blank spaces between
numbers are ignored.)
Up to 30 fax numbers can be registered for junk fax
number. (Including numerals “0-9”, blank space, and +
symbol.) (When comparing the sender's numeric ID to the
registered junk fax numbers, blank spaces between
numbers are ignored.)
136
RESTRICT D. DIAL
1
INVALID
Enable or disable the Restrict Direct Dial function.
When set to “VALID”, manual input destination Tel No. and
“Redial” button are not accepted.
When set to “VALID”, manual input destination Tel No. and
“Redial” button are not accepted.
2
VALID
137
RE-ENTER D. DIAL
1
INVALID
Used to set whether to display the address reinsert screen
when indicating the address for direct dial, inputting the
mail address for Internet FAX, redialling or inputting the
address for confirming the address. When set to “VALID”,
unit will require input destination Tel No. or Mail address
twice for confirmation. Unit will proceed transmit job when
destination data is matched.
This setting is not available when the Restrict Direct Dial
function is set to “VALID”.
when indicating the address for direct dial, inputting the
mail address for Internet FAX, redialling or inputting the
address for confirming the address. When set to “VALID”,
unit will require input destination Tel No. or Mail address
twice for confirmation. Unit will proceed transmit job when
destination data is matched.
This setting is not available when the Restrict Direct Dial
function is set to “VALID”.
2
VALID
142
LAN PC-FAX
1
INVALID
Selecting whether the machine accepts and performs G3
relayed transmission. (Relay Station Functions)
(For UF-5600 only)
relayed transmission. (Relay Station Functions)
(For UF-5600 only)
2
VALID
No.
Parameter
Setting
Number
Setting
Comments