Panasonic TH-65VX300ER Operating Guide

To view the 3D images, please adjust and setup the 3D settings.

Set these settings for each input terminals.

On:  To view the 3D images, please set it to “On”. You can see 3D images for 3D image signal and 2D images for 

2D image signal.

Off: You can see 2D images instead of 3D images.
When set to “On”, “3D” is displayed during 3D images.

3D images method is set. 

Auto: 3D images are automatically displayed according to the signal.

Simultaneous:  Set this format when selecting a slot that one of the following terminal boards is installed:

Dual HD-SDI Terminal Board for 3D (TY-FB30DHD3D), Dual DVI-D Terminal Board for

3D (TY-FB30DD3D)

Side by Side/Top and Bottom: One of the formats of the 3D standard. Select these formats as necessary.
Native: Displays the input signal as it is. Use to identify the format type of the input signal.

The 3D images are separated and displayed as right and left images.

3D: Normal 3D images display (initial setting)

Comparison:  Left image (L) and right image (R) are placed side by side. If the 3D system is “Top and Bottom”, the 

images are displayed, being set one above the other.

 

Only the left image (L) is displayed. 

Right: Only the right image (R) is displayed. 

3D

Comparison

Left

Right

• This function is disabled during 2D images.

• The factory default setting is “3D”. To view the 3D images, please use “3D”.

This function calibrates the timing to switch the right and left images as well as the timing to switch the shutter of 

right and left 3D Eyewear.

Select “Reverse” if you feel that the sense of depth is unusual.

The colour adjustment during the 3D images is set.

On: The colour when using the 3D Eyewear is adjusted. (initial setting)

Off: The colour when using the 3D Eyewear is not adjusted. The 2D image setting is used.
Note: The factory default setting is “On”. To view the 3D images, please set it to “On”.

Displays the precautions for viewing 3D images.

 

2 

 access

1 

 select

2 

 change

1 

  select

PC

NANODRIFT

16:9

3D

Signal

Waveform Monitor

Marker settings

RGB/MONO settings

Extended life settings

Screensaver

Network Setup

Input label

Function Button Settings

On/Off Timer Setup

Day/Time Setup

Component/RGB-in select

RGB

3D Settings

On

3D Function

On

Auto

3D Picture Format

3D Settings

3D Colour Compensation

Normal

3D Picture Sequence

3D

3D Viewing Mode

Safety Precautions