Toshiba 49" Toshiba XUHD WLAN TV Important Safety Instructions
English - 10 -
Connections
Connector
Type
Cables
Device
Scart
Connection
(back)
YPBPR
/ Video
YPbPr Video
Connection
(back)
YPbPr Connection Cable
HDMI
Connection
(bottom&side)
VGA
Connection
(bottom)
AUDIO IN
PC/YPbPr/
Back AV
Audio
Connection
(back)
YPbPr/PC Audio Cable
SPDIF
SPDIF
(Optical Out)
Connection
(bottom)
BACK AV
/ Video
R
L
Back AV
(Audio/Video)
Connection
(back)
Audio Video Cable
HEADPHONE
Headphone
Connection
(side)
USB
Connection
(back&side)
CI
Connection
(side)
CAM
module
LAN
Ethernet
Connection
(bottom)
LAN / Ethernet Cable
Subwoofer
Connection
(back)(*)
See the illustrations on the left
side. To enable PC/YPbPr audio,
you will need to use the back
audio inputs with a YPbPr/PC
audio cable for audio connection.
If an external device is connected
via the SCART socket, the TV
may automatically switch to
EXT1 mode. When receiving
DTV channels (Mpeg4 H.264) or
while in Media Browser mode,
output will not be available via
the SCART socket. When using
a wall mounting kit (available
from a third party in the market),
we recommend that you plug
all your cables into the back
of the TV before mounting on
the wall. Insert or remove the
CI module only when the TV is
SWITCHED OFF. You should
refer to the module instruction
manual for details of the settings.
The USB 2.0 inputs on the back
side and on the left side of the TV
supports devices up to 500mA.
Connecting devices that have
current value above 500mA may
damage your TV. The USB 3.0
input (optional) on the left side of
the TV positioned above the other
USB input, supports devices up to
1A. When connecting equipment
using a HDMI cable to your TV,
to guarantee sufficient immunity
against parasitic frequency
radiation and trouble-free
transmission of high definition
signals, such as 4K content, you
have to use a high speed shielded
(high grade) HDMI cable with
ferrites.
If you want to connect a
device to the TV, make
sure that both the TV
and the device are turned off
before making any connection.
After the connection is done, you
can turn on the units and use
them.
(*) For external subwoofer connection (If this feature is supported by your TV)