Toshiba 49" Toshiba XUHD WLAN TV Important Safety Instructions

English   - 12 -

available in 

System>Settings>More menu and can 

be turned off/on later. 
Press 

OK button on the remote control to continue 

and the 

Network/Internet Settings menu will be 

displayed,  if  you  confirm  the  previously  displayed 

message asking whether you want to do the network 

settings.  Please refer to 

Connectivity section to 

configure a wired or a wireless connection. After the 

settings are completed press 

OK button to continue. 

To skip to the next step without doing anything select 

No and press the OK button when the message is 

displayed asking whether you want to do the network 

settings.
After the initial settings are completed TV will start 

to search for available broadcasts of the selected 

broadcast types.
After all the available stations are stored, scan results 

will be displayed. Press 

OK to continue. The Edit 

Channel List menu will be displayed next. You can 

edit the channel list according to your preferences or 

press the 

Menu button to quit and watch TV.

While the search continues a message may appear, 

asking whether you want to sort channels according 

to the LCN

(*). Select Yes and press OK to confirm.

You can perform SatcoDX operations using the 

Installation>Satellite Settings menu. In the 

SatcoDX menu, there are two options regarding to 

the SatcoDx.
You can download or upload SatcoDX data. In order 

to perform these functions a USB device must be 

connected to the TV.
You can upload current services and related satellites 

& transponders in TV, to a USB device.
Additionally you can download one of the SatcoDx 

files stored in USB device, to the TV. 
When you select one of these files, all services and 

related satellites and transponders in the selected 

file will be stored in the TV. If there are any installed 

terrestrial, cable and/or analog services, they will be 

kept and only satellite services will be removed. 
Afterwards, check your antenna settings and make 

changes if necessary. An error message stating “

Signal” may be displayed if the antenna settings are 

not configured properly.

IMPORTANT! Back up the files on your storage devices 

before connecting them to the TV. Manufacturer will 

not be responsible for any file damage or data loss. 

Certain types of USB devices (e.g. MP3 Players) 

or USB hard disk drives/memory sticks may not be 

compatible with this TV. The TV supports FAT32 and 

NTFS disk formatting.
Wait a little while before each plugging and unplugging 

as the player may still be reading files. Failure to do 

so may cause physical damage to the USB player 

and the USB device itself. Do not pull out your drive 

while playing a file.
You can use USB hubs with your TV’s USB inputs. 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk.

You can play photo, music and movie files stored on a 

USB disk by connecting it to your TV. Connect a USB 

disk to one of the USB inputs located on the side of 

the TV. Pressing the 

Menu button while in the Media 

Browser mode will access the Picture, Sound and 

Settings menu options. Pressing the Menu button 

again will exit from this screen.

 

You can set your 

Media 

Browser preferences by using the Settings menu.

Start playback with the 

button and activate 

All files in the list will be 

continuously played in original 

order

Start playback with the 

button and activate 

The same file will be played 

continuously (repeat)

Start playback with the 

Play 

button and activate 

All files in the list will be 

played once in random order

Start playback with the 

Play 

button and activate 

, 

All files in the list will be 

continuously played in the 

same random order.

You can personalize your TV and see your favorite 

image or photo on the screen each time your TV boots 

up. To do this, copy your favorite image files into a USB 

disk and open them from the 

Media Browser menu. 

When you have chosen the desired image, highlight it 

and press 

OK to view it in full screen. Press OK again 

to choose the image as custom logo. A confirmation 

message will be displayed. Select 

Yes and press OK