Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide

Installing Interface Cards in Cisco 2800 Series Routers

OL-5791-01

Installing and Removing Slot Dividers

Installing Slot Dividers in HWIC Slots on Cisco 2801 Routers

Figure 1

shows a slot divider for HWIC slots on Cisco 2801 routers.

Figure 1

Slot Divider for HWIC Slots on Cisco 2801 Routers

Install slot dividers into HWIC slots on Cisco 2801 routers as follows:

Step 1

Guide the slot divider between the two rails in the bottom of the HWIC slot. Push the slot divider in until
it is fully seated. When the slot divider is fully seated, its outer end is flush with the front panel of the
router. See

Figure 2

121101