Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide
14
Installing and Upgrading Internal Modules in Cisco 2800 Series Routers
OL-5792-04
Installing and Removing DRAM DIMMs
Figure 13
Removing a DRAM DIMM
Step 3
Place the DIMM in an antistatic bag to protect it from ESD damage.
Installing a DRAM DIMM in a Cisco 2801 Router
To install a DRAM DIMM in a Cisco 2801 router, follow these steps:
Step 1
Locate the DIMM socket on the motherboard.
Step 2
Remove any existing DIMM by gently pulling the spring-loaded clips on the end of the socket far enough
to clear the DIMM, and gently pulling the DIMM up and away from the socket. See
to clear the DIMM, and gently pulling the DIMM up and away from the socket. See
Figure 14
Removing a DIMM
Step 3
.
1
Release the latches
2
Remove the DRAM DIMM
103466
1
1
2
103155
1
2