Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide
Corporate Headquarters:
Copyright © 2004 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Preinstallation Requirements and Planning for
Cisco 2800 Series Routers
Cisco 2800 Series Routers
This document describes site requirements and equipment needed to install your Cisco 2800 series
integrated services router. It includes the following sections:
integrated services router. It includes the following sections:
•
•
•
•
•
•
Note
To see translations of the warnings that appear in this publication, refer to the
document that
accompanies your router.
Warning
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Statement 1030
Safety Recommendations
Follow these guidelines to ensure general safety:
•
Keep the chassis area clear and dust-free during and after installation.
•
If you remove the chassis cover, put it in a safe place.
•
Keep tools and chassis components away from walk areas.
•
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
your sleeves.