Cisco 2811 ROUTER 2FE 1NME 4HWIC 2PVDM 2AIM IP BASE WITH A/C POWER SUPPLY Specification Guide
7
Chassis Installation Procedures for Cisco 2800 Series Routers
OL-5786-03
Setting Up the Chassis
Attaching Rack-Mount Brackets to Cisco 2801 Routers
Use four of the supplied number-8 Phillips flat-head screws to attach the long side of each bracket to the
router.
router.
shows how to attach the brackets to the sides of the router with the front panel forward.
Figure 8
Attaching Rack-Mounting Brackets to a Cisco 2801 Router
Attaching Rack-Mount Brackets to Cisco 2811, Cisco 2821, and Cisco 2851 Routers
Attach the mounting brackets to the router chassis as shown in
through
, using the
screws provided.
Caution
Do not overtorque the screws. The recommended torque is 15–18 inch-lb (1.7–2.0 N-m).
Attach the second bracket to the opposite side of the chassis. Use a number 2 Phillips screwdriver to
install the bracket screws.
install the bracket screws.
Caution
Your chassis installation must allow unrestricted airflow for chassis cooling.
Figure 9
Bracket Installation for Front Mounting
95770
R
95745
Bracket
for 23-inch rack
Bracket
for 19-inch rack
Bracket
for 19-inch rack
Bracket
for 23-inch rack
Use four screws on each side.
Do Not Remo
ve During Netw
ork Operatio
n
COMPACT F
LASH
0
1
OPTIONAL R
PS INPUT
SYS
PWR
AUX/
PWR
SYS
ACT
CF
12V 1
8A
100-240 V~ 3
A
50/60 Hz
CONSOLE
AUX