Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Specification Guide
A-20
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Appendix A Power Supply Specifications
1400 W AC-Input Power Supply
1400 W Power Supply AC Power Cords
lists the specifications for the AC power cords that are available for the 1400 W AC-input
power supply. These power cords plug into the 1400 W PEM (PEM-20A-AC+); not directly into the
power supply. The table includes references to power cord illustrations.
power supply. The table includes references to power cord illustrations.
Note
All 1400 W power supply power cords are 14 feet (4.3 meters) in length.
Note
All 1400 W power supply power cords have an IEC60320/C19 appliance plug at one end.
Output holdup time
20 ms minimum
Heat Dissipation
1193 BTU/hour (approx.)
Front panel LEDs
•
INPUT OK
•
Green—Source AC voltage is OK. (Input voltage
is 85 VAC or greater.)
is 85 VAC or greater.)
•
Off—Source AC voltage falls below 70 VAC, is
not present, or the power supply is turned off.
not present, or the power supply is turned off.
•
FAN OK
•
Green—Power supply fan is operating properly.
•
Off—Power supply fan failure is detected.
•
OUTPUT FAIL
•
Red—Problem with one or more of the DC-output
voltages of the power supply is detected.
voltages of the power supply is detected.
•
DC-output voltages within acceptable margins.
Weight
7.8 lb (3.5 kg)
Table A-9
1400 W Power Supply Specifications (continued)
Specification
Description
Table A-10 1400 W Power Supply AC Power Cords
Locale
Power Cord
Part Number
Part Number
Source Plug Type
Cordset Rating
Power Cord
Reference
Illustration
Reference
Illustration
Argentina
CAB-7513ACR=
IRAM 2073
10 A, 250 VAC
Australia, New Zealand CAB-7513ACA=
SAA AS 3112
15 A, 250 VAC
People’s Republic of
China
China
CAB-AC16A-CH=
GB16C
16 A, 250 VAC
Continental Europe
CAB-7513ACE=
CAB-AC-2500W-EU=
CEE 7/7
CEE 7/7
16 A, 250 VAC
16 A, 250 VAC