Cisco CATALYST 6509E 9 SLOT 15U CHASSIS NO POWER SUPPLY NO FAN TRAY Specification Guide

Page of 336
1-50
Catalyst 6500 Series Switches Installation Guide
OL-5781-04
Chapter 1      Product Overview
  Catalyst 6513 Switch
Catalyst 6513 Switch
 lists the features of the Catalyst 6513 switch chassis. 
 lists the specifications of the 
Catalyst 6513 switch chassis. 
 shows a view of the Catalyst 6513 switch chassis.
Table 1-19
Catalyst 6513 Switch Features
Feature
Description
Chassis
Thirteen horizontal slots. Slots are numbered from (1) top to (13) 
bottom. 
Supervisor Engines
Supports Supervisor Engine 2, Supervisor Engine 32, and Supervisor 
Engine 720. 
Supervisor Engine 2 is installed in slot 1 and slot 2. 
Supervisor Engine 1A is not supported.
Supervisor Engine 32 and Supervisor Engine 720 are installed in 
slot 7 and slot 8.
Supervisor Engine 32 and Supervisor Engine 720 require that you 
install the high-speed fan tray. You must also install a 2500 W or 
higher capacity power supply in the chassis to power the high-speed 
fan tray.
Supervisor Engine 720 has built-in switching fabric. Switch Fabric 
Modules are not supported by Supervisor Engine 720 and cannot be 
installed in the same chassis.
The uplink ports are fully functional on all redundant supervisor engine 
models when they are in standby mode. 
Note
Redundant supervisor engines must be configured identically.
Modules
Supports up to 12 Catalyst 6500 series modules.
WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be 
installed in slot 7 or slot 8.
WS-X6748-SFP, WS-X6748-GE-TX, and WS-X6704-10GE modules 
are not supported in slots 2–8; they are supported in slots 9–13.
Slots 1–8 support a single fabric channel; slots 9–13 support dual 
fabric channels.
Some Catalyst 6500 series modules may:
Not be supported
Require that you install a Supervisor Engine 720
Have chassis slot restrictions
Require a specific software release level
Check your software release notes for specific information.