Cisco CATALYST 5000 ROUTING SWITCH MODULE Specification Guide
Route Switch Module 7-3
Route Switch Module (WS-X5302)
The RSM provides multiprotocol routing for the Catalyst 5000 family switch Ethernet
interfaces. Table 7-2 lists the IOS features available for the RSM.
interfaces. Table 7-2 lists the IOS features available for the RSM.
Note
The RSM supports all media types that are supported by the Catalyst 5000 family
switches.
CPU HALT
Indicates the RSM status.
On
Normal operation.
Off
The system detected a processor hardware failure.
ENABLED
Indicates the RSM operational status.
On
The IP microcode is loaded and the RSM is operational.
PCMCIA
SLOT 0 and
SLOT 1
SLOT 0 and
SLOT 1
Indicates when slot 1 and slot 0 PCMCIA devices are accessed
by the RSM.
by the RSM.
On
Device in PCMCIA slot is accessed by RSM.
TX
1
Indicates the port transmits.
Green
The port is transmitting a packet (LED is lit for approximately
50 ms).
50 ms).
RX
2
Indicates the port receives.
Green
The port is receiving a packet (LED is lit for approximately
50 ms
50 ms
3
).
1
TX=transmit
2
RX=receive
3
ms = milliseconds
Table 7-1
RSM (WS-X5302) Status LED Descriptions (continued)
LED
State
Description