Cisco 3600 2 PORT FAST ETHERNET 2 PORT WAN INTERFACE Specification Guide
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
This document is not restricted to specific software and hardware versions.
Conventions
.
Product Numbers
NM-1FE2W Network Module with One-Fast Ethernet and Two-WIC slots.
●
NM-1FE1R2W Network Module with One Fast Ethernet, One Token Ring and Two WIC slots.
●
NM-2FE2W Network Module with Two Fast Ethernet and Two WIC slots.
●
NM-2W Network Module with Two WIC slots and no LAN (Ethernet/Fast Ethernet) Ports.
●
for additional information.
Features
Fast Ethernet
RJ-45 connector, 100 BaseT only.
❍
Supports 10 and 100 Mbps, auto-sensing.
❍
Supports full and half duplex.
❍
Supports Inter-Switch Link (ISL) and Token Ring ISL in hardware (ISL requires the Cisco
IOS® "Plus" feature set).
IOS® "Plus" feature set).
❍
Does not support Fast EtherChannel.
❍
Uses the same Fast Ethernet controller as all other Cisco 2600/3600 Fast Ethernet ports.
❍
●
Token Ring
RJ-45 and DB-9 connector (only one may be used at a time).
❍
Supports full duplex Token Ring.
❍
●
Cisco - Understanding Fast Ethernet LAN/WAN Interface Card Network Modules
http://kbase:8000/paws/servlet/ViewFile/7254/nm-fe2w.xml?convertPaths=1 (2 of 5) [4/20/2005 9:48:39 AM]