Cisco 7500 SERIES ROUTE SWITCH PROCESSOR 16 Specification Guide
21
Route Switch Processor (RSP16) Installation and Configuration Guide
OL-4661-03
Installing the RSP16
G.703/JT2 software, Version 1.0.
X.25 software, Version 3.0.0.
Chassis Interface.
1 EIP controller (4 Ethernet).
4 Ethernet/IEEE 802.3 interface(s)
2043K bytes of non-volatile configuration memory.
16384K bytes of Flash internal SIMM (Sector size 256K).
No slave installed in slot 7.
Press RETURN to get started!
00:00:05:%CI-6-BPLANE:CI type 7 differs from NVRAM type 2
00:00:06:%SYS-5-CONFIG_I:Configured from memory by console
00:00:08:%LINK-5-CHANGED:Interface Ethernet8/0, changed state to administratively down
00:00:08:%LINK-5-CHANGED:Interface Ethernet8/1, changed state to administratively down
00:00:08:%LINK-5-CHANGED:Interface Ethernet8/2, changed state to administratively down
00:00:08:%LINK-5-CHANGED:Interface Ethernet8/3, changed state to administratively down
00:00:08:%SYS-5-RESTART:System restarted --
Cisco Internetwork Operating System Software
IOS (tm) RSP Software (RSP-PV-M), Experimental Version 12.1(20020307:194032)
[biff-121E_LATEST 127]
Copyright (c) 1986-2002 by cisco Systems, Inc.
Compiled Fri 26-Apr-02 16:52 by biff
00:00:08:%SNMP-5-COLDSTART:SNMP agent on host Router is undergoing a cold start
00:00:10:%LINEPROTO-5-UPDOWN:Line protocol on Interface Ethernet8/0, changed state to
down
00:00:10:%LINEPROTO-5-UPDOWN:Line protocol on Interface Ethernet8/1, changed state to
down
00:00:10:%LINEPROTO-5-UPDOWN:Line protocol on Interface Ethernet8/2, changed state to
down
00:00:10:%LINEPROTO-5-UPDOWN:Line protocol on Interface Ethernet8/3, changed state to
down
00:00:10:%SYS-6-BOOTTIME:Time taken to reboot after reload = -210 seconds
Router>
•
The active console display should look similar to the following for a Cisco 7507 and Cisco 7507-MX
(note the RSP slots indicated):
(note the RSP slots indicated):
System Bootstrap, Version 11.1, RELEASED SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
SLOT 2 RSP16 is system master
SLOT 3 RSP16 is system slave
RSP16 processor with 128 Mbytes of main memory
[additional displayed text omitted from this example]
Slave in slot 3 is halted.
Step 4
With a single RSP16 (non-HSA or non-HA), verify that the console terminal displays the system banner
and startup screen as the system restarts. The display should look similar to the following:
and startup screen as the system restarts. The display should look similar to the following:
System Bootstrap, Version 11.1, RELEASED SOFTWARE
Copyright (c) 1986-1999 by cisco Systems, Inc.
SLOT 6 RSP16 is system master
RSP16 processor with 128 Mbytes of main memory
[additional displayed text omitted from this example]