Cisco FASTHUB 412 12 PORT 10/100 STACKABLE Specification Guide
C H A P T E R
Overview 1-1
1
Overview
This chapter introduces the FastHub 400 series and covers the following topics:
•
Summary of key features
•
Descriptions of the front and rear panels
•
Overview of the management options supported by the FastHub 400M models
•
Examples of network configurations using the hub
Key Features
The FastHub 400 series (shown in Figure 1-1 and described in Table 1-1) is a family of
stackable, 12- or 24-port, autosensing 10/100-Mbps Class II repeaters:
stackable, 12- or 24-port, autosensing 10/100-Mbps Class II repeaters:
•
The FastHub 412M and FastHub 424M models (hereafter referred to as the
FastHub 400M models) are management hubs that can be configured and monitored
through web-based and command-line interfaces and Simple Network Management
Protocol (SNMP). You can also use these hubs to manage a stack of up to three other
FastHub 400 models and serve up to 96 user connections.
FastHub 400M models) are management hubs that can be configured and monitored
through web-based and command-line interfaces and Simple Network Management
Protocol (SNMP). You can also use these hubs to manage a stack of up to three other
FastHub 400 models and serve up to 96 user connections.
•
The FastHub 412 and FastHub 424 models are manageable hubs that can be configured
and monitored through interconnection to a FastHub 412M or FastHub 424M model.
and monitored through interconnection to a FastHub 412M or FastHub 424M model.