Cisco FASTHUB 412 12 PORT 10/100 STACKABLE Specification Guide

Page of 22
Key Features
FastHub 400 10/100 Series Installation and Configuration Guide
1-2
Each FastHub model can be a standalone networking device or can connect to servers,
switches, routers, and other hubs to form a larger network. You can also stack and
interconnect up to four FastHub 400 models to form a larger network. See the “Network
Configuration Examples” section on page 1-18 for additional examples of using the hub in
different networks.
The expansion slot on the rear panel of each FastHub model is for the optional
10BaseT/100BaseTX or 100BaseFX switched uplink module. These switched uplink
modules can provide extended distances to other network devices such as servers, hubs, and
routers. The maximum cable length for connecting to the 10BaseT/100BaseTX switched
uplink module is 100 meters. The maximum cable length for connecting to the 100BaseFX
switched uplink module with multimode fiber-optic cable in half-duplex mode is
412 meters and 2 kilometers in full-duplex mode.
Figure 1-1
FastHub 400 Series
15227
Description
12 autosensing 10/100 network ports
1 autosensing 10/100 uplink port
1 high-speed expansion slot
   (on rear panel) 
12 autosensing 10/100 network ports
1 autosensing 10/100 uplink port
1 high-speed expansion slot (on rear panel)
1 console port (on rear panel) 
24 autosensing 10/100 network ports
1 autosensing 10/100 uplink port
1 high-speed expansion slot
   (on rear panel) 
24 autosensing 10/100 network ports
1 autosensing 10/100 uplink port
1 high-speed expansion slot (on rear panel)
1 console port (on rear panel) 
Model
FastHub 412 hub
(WS-C412)
FastHub 412M hub
(WS-C412M)
FastHub 424 hub
(WS-C424)
FastHub 424M hub
(WS-C424M)
RPS
MODE
1x
2x
3x
4x
5x
6x
7x
8x
24
9x
10x
11x
12x
13x
14x
15x
16x
17x
18x
19x
20x
22x
23x
24x
21x
10BaseT/100BaseTx
RPS
MODE
1x
2x
3x
4x
5x
6x
7x
8x
9x
10x
11x
12x
12
10BaseT/100BaseTx