Cisco CATALYST 5500 9 PORT GIGABIT ETHERNET SWITCH MODULE Specification Guide
Switching Module Installation 3-25
Verifying and Configuring the Modules
Verifying and Configuring the Modules
For complete information on verifying and configuring all modules, refer to the Software
Configuration Guide for your switch. For information on all switch commands, refer to the
Command Reference for your switch.
Configuration Guide for your switch. For information on all switch commands, refer to the
Command Reference for your switch.
Note
To verify the installation of the RSM, refer to the Catalyst 5000 Family Route Switch
Module Installation and Configuration Note.
Verifying Newly Installed Modules
Use the show module or show port [mod_num]/[port_num] command to verify that the
system acknowledges the new modules and has brought them online. Refer to the
Command Reference for your switch for additional information.
system acknowledges the new modules and has brought them online. Refer to the
Command Reference for your switch for additional information.
Configuring the RSMs
For information on configuring RSMs, refer to the Catalyst 5000 Family Route Switch
Module Installation and Configuration Note and the Software Configuration Guide for your
switch. For information on configuring RSM/VIP2s, refer to the Route Switch Module
Catalyst VIP2-15 and VIP2-40 Installation and Configuration Note.
Module Installation and Configuration Note and the Software Configuration Guide for your
switch. For information on configuring RSM/VIP2s, refer to the Route Switch Module
Catalyst VIP2-15 and VIP2-40 Installation and Configuration Note.