Canon EOS 5D Mark IV L-series Zoom Lens Kit Owner's Manual
![Canon](https://files.manualsbrain.com/attachments/4b6818c07b947b910f8cfb49338c2c63bdefaee1/common/fit/150/50/61ea34cb812b6780fe3b16f0b9221bd2f7635c65cee2473b66396d8b72cd/brand_logo.png)
503
7
Custom ControlsN
While the metering timer is active, when you press the depth-of-field
preview button or the lens’s AF stop button, the focusing point can be
switched to the registered AF point.
preview button or the lens’s AF stop button, the focusing point can be
switched to the registered AF point.
*4: On the setting screen, when you press the <B> button, you can select [Switch
only when btn is held] or [Switch each time btn is pressed]. To register the AF
point, see page 500.
point, see page 500.
While the metering timer is active, pressing the <p> (AF area
selection) button will switch between the current AF point and the center
AF point or registered AF point.
selection) button will switch between the current AF point and the center
AF point or registered AF point.
*5: On the setting screen, when you press the <B> button, you can select [Switch
to center AF point] or [Switch to registered AF point]. To register the AF point,
see page 500.
see page 500.
While the metering timer is active, you can select an AF point directly
with the <5> or <9> dial without pressing the <S> button.
with the <5> or <9> dial without pressing the <S> button.
*6: With the Quick Control Dial setting screen
displayed, you can press the <B> button, then
set the direction for switching the AF point for
when the <5> dial is turned. The [Direction: AF
point switching] settings for [Horizontal] and
[Vertical] will work for Single-point Spot AF,
Single-point AF, Man. select.c: AF point
expansion, and Expand AF area: Surround. The
[Direction: Zone AF frame switch] settings for
[Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.
set the direction for switching the AF point for
when the <5> dial is turned. The [Direction: AF
point switching] settings for [Horizontal] and
[Vertical] will work for Single-point Spot AF,
Single-point AF, Man. select.c: AF point
expansion, and Expand AF area: Surround. The
[Direction: Zone AF frame switch] settings for
[Cycle through the zones], [Horizontal], and [Vertical] will work with Zone AF.
*7: On the Multi-controller setting screen, you can press the <B> button and select
the AF point ([Switch to center AF point] or [Switch to registered AF point]) the
camera switches to when you press the center of <9>. To register the AF point, see
page 500.
camera switches to when you press the center of <9>. To register the AF point, see
page 500.
: Switch to registered AF point
: Selected AF point z Center/Registered AF point
:Direct AF point selection
If you assign [Direct AF point selection] to <5> and you want to change
the aperture in the <a> mode, hold down the <A> button and turn the
<6> dial.
the aperture in the <a> mode, hold down the <A> button and turn the
<6> dial.