Pioneer AVIC-7201NEX Package Owner's Manual

2 Using packing tape or similar, place markings

as follows.

Rear bumper

25 cm
(9-7/8 in.)

50 cm (1 ft. 8 in.)

2 m (6 ft. 7 in.)

Markings

3 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

4  Touch [Camera settings].
5  Touch [Parking Assist Guide Adjust].
6  Set the guidelines by dragging the four points.

Adjust the guidelines so that the guidelines can be overlaid to

the markings
p

Touch / / / /

to adjust the guidelines if

necessary. Touch [Default] to reset the settings.

Setting the second camera

You can view images of the second camera (a front camera etc.)

on the screen of this product.

Setting the second camera activation

The default setting is “Off”.
p

This function is synchronized with “AV Input” setting.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].
3 Touch [2nd Camera Input] to switch “On” or

“Off”.

Setting the reversed image

The default setting is “Off”.
p

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

This function is available when “AV Input” is set to

“Camera” or “2nd Camera Input” is set to “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].
3 Touch [2nd Camera: Reverse video] to switch

“On” or “Off”.

Setting the camera for Camera
View mode

To display Camera View at all times, “Camera View” needs to be

set to “On”. (The same mode is turned on when

is touched

on the camera view screen. The setting value is synchronized.)

The default setting is “Off”.
p

To set the rear view camera as the camera for Camera View

mode, set “Back Camera Input” to “On”.

 Refer to Setting rear view camera activation on page 64

When using the second camera, set “AV Input” to

“Camera” or “2nd Camera Input” to “On” (both settings are

synchronized).

 Refer to Setting the second camera on page 65

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Camera settings].
3 Touch [Camera View] to switch “On” or “Off”.

You can also turn this function on by touching [Camera

View] on the AV source selection screen or in the source

list.

Setting the demo mode

The default setting is “On”.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Demo Mode] to switch “On” or “Off”.

Selecting the system language

If the embedded language and the selected language setting

are not the same, text information may not display properly.

Some characters may not be displayed properly.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [System Language].
3 Touch the language.

Setting the keyboard language
with the application for iPhone

You can use the keyboard in AppRadio Mode by setting the

language of the keyboard for iPhone.
p

This function is only available in AppRadio Mode on the

iPhone.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Keyboard].
3 Touch the language.

Adjusting the response posi-
tions of the touch panel (touch
panel calibration)

7200NEX

6200NEX

5200NEX

If you feel that the touch panel keys on the screen deviate from

the actual positions that respond to your touch, adjust the

response positions of the touch panel screen.
p

This setting is available only when you stop your vehicle in a

safe place and apply the parking brake.

Do not use sharp pointed tools such as a ballpoint or

mechanical pen, which could damage the screen.

Do not turn off the engine while saving the adjusted position

data.

1 Display the “System” setting screen.

 Refer to Displaying the “System” setting screen on page

2 Touch [Touch Panel Calibration].

< CRB4817-A >

System settings