Alpine INE-W977HD Owner's Manual
109
-EN
Applying Alpine TuneIt App
You can not use Sound App
Because External AP is on.
• “Setting the External Audio Processor” (page 50) is “On.”
Because External AP is on.
• “Setting the External Audio Processor” (page 50) is “On.”
- When “External Audio Processor” (page 50) is set to “On,” you
cannot perform Sound Tuning from the Alpine TuneIt App. Set
“External Audio Processor” to “Off ” to perform Sound Tuning
from the Alpine TuneIt App.
“External Audio Processor” to “Off ” to perform Sound Tuning
from the Alpine TuneIt App.
(X209D only)
DISC ERROR
• Mechanism error.
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press
again for at least 3 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
LO-TEMP
• The temperature in the car is too low.
• The temperature in the car is too low.
- Raise the temperature in the car to normal temperature.
NO DISC
• No disc is inserted.
• No disc is inserted.
- Insert a disc.
• Although a disc is inserted, “NO DISC” is displayed and the unit
does not start to play or eject the disc.
- Remove the disc by pressing
- Remove the disc by pressing
again for at least 3 seconds.
REGIONAL CODE VIOLATION
• Disc does not match regional code number.
• Disc does not match regional code number.
- Load a disc that matches the regional code number.
HI-TEMP
• Protective circuit is activated at high temperature.
• Protective circuit is activated at high temperature.
- The indicator will disappear when the temperature returns to
within operation range.
- Leave the power OFF until the temperature decreases and then
turn the power ON again.
LOADING ERROR
EJECT ERROR
• Mechanism error.
EJECT ERROR
• Mechanism error.
1) Press
and eject the disc.
If the disc does not eject, press c again for at least 3 seconds
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
and eject the disc.
If the disc still does not eject, consult your Alpine dealer.
2) When the error indication remains after ejecting, press
again.
If the error indication still does not turn off after pressing
If the error indication still does not turn off after pressing
a few times, consult your Alpine dealer.
PROTECTED
• A copy-protected WMA file was played back.
• A copy-protected WMA file was played back.
- You can only play back non-copy-protected files.
ILLEGAL FORMAT
• A disc with an unsupported region code or other copyright
• A disc with an unsupported region code or other copyright
infringement has been inserted.
- Change to another disc.
- Change to another disc.
READ ERROR
• The unit cannot read a disc's TOC because the disc has many
• The unit cannot read a disc's TOC because the disc has many
scratches or is very dirty.
- Clean the dirty disc, and insert it again. Damaged discs should
- Clean the dirty disc, and insert it again. Damaged discs should
be replaced.
Navigation
The vehicle’s position is erroneous.
• The GPS reception is poor.
• The GPS reception is poor.
- Drive the vehicle in an area of good GPS reception to allow the
unit to recalibrate itself. Move to a location where strong GPS
reception is possible.
reception is possible.
No operation
• Moisture condensation
• Moisture condensation
- Allow enough time for the condensation to evaporate (about 1
hour).
• Ambient Temperature
- Make sure the temperature inside the vehicle is between 0°C
and 45°C (32°F and 113°F).