Alpine INE-W977HD Owner's Manual
110
-EN
Specifications
MONITOR SECTION
FM TUNER SECTION
AM TUNER SECTION
USB SECTION
HDMI SECTION
GPS SECTION
Bluetooth SECTION
GENERAL
• Due to continuous product improvement, specifications and design are
subject to change without notice.
• The LCD panel is manufactured using an extremely high precision
manufacturing technology. Its effective pixel ratio is over 99.99%. This
means that there is a possibility that 0.01% of the pixels could be either
always ON or OFF.
means that there is a possibility that 0.01% of the pixels could be either
always ON or OFF.
Screen Size
9” (X209D)
8” (X208U)
7” (INE-W977HD)
8” (X208U)
7” (INE-W977HD)
LCD Type
Transparent type TN LCD
Operation System
TFT active matrix
Number of Picture Elements
1,152,000 pcs. (800 × 480 × 3
(RGB))
(RGB))
Effective Number of Picture Elements
99% or more
Illumination System
LED
Tuning Range
87.7 – 107.9 MHz
Mono Usable Sensitivity
9.3 dBf (0.8 μV/75 ohms)
50 dB Quieting Sensitivity
13.5 dBf (1.3 μV/75 ohms)
Alternate Channel Selectivity 80 dB
Signal-to-Noise Ratio
Signal-to-Noise Ratio
65 dB
Stereo Separation
35 dB
Capture Ratio
2.0 dB
Tuning Range
530 – 1,710 kHz
Usable Sensitivity
25.1 μV/28 dBf
USB requirements
USB 2.0
Max. Power Consumption
1,500 mA (CDP Support)
USB Class
USB (Mass Storage Class)
File System
FAT16/32
Number of Channels
2-Channels (Stereo)
Frequency Response*
1
5 – 20,000 Hz (±1 dB)
Total Harmonic Distortion
0.008% (at 1 kHz)
Dynamic Range
95 dB (at 1 kHz)
Signal-to-Noise Ratio
100 dB
Channel Separation
85 dB (at 1 kHz)
*1
Frequency response may differ depending on the encoder software/bit
rate.
rate.
Input Format
480p/VGA
Output Format
480p
GPS Reception frequency
1,575.42 ±1 MHz
GPS Reception sensitivity
-130 dB max.
Bluetooth Specification
Bluetooth V3.0
Output Power
+4 dBm Ave. (Power class 2)
Profile
HFP (Hands-Free Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
SPP (Serial Port Profile)
OPP (Object Push Profile)
PBAP (Phone Book Access Profile)
A2DP (Advanced Audio
Distribution Profile)
AVRCP (Audio/Video Remote
Control Profile)
SPP (Serial Port Profile)
Power Requirement
14.4 V DC
(11–16 V allowable)
(11–16 V allowable)
Operating temperature
-4°F to +140°F
(-20°C to + 60°C)
(-20°C to + 60°C)
Power Output
16 W RMS × 4*
2
*2
Primary amplifier ratings per CEA-2006 Standard
• Power output: measured at 4 Ohms and ≤ 1% THD+N
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
• S/N: 80 dBA (reference: 1 W into 4 Ohms)
Weight
1.54 kg (3 lbs. 6 oz) (X208U)
1.41 kg (3 lbs. 2 oz)
(INE-W977HD)
1.41 kg (3 lbs. 2 oz)
(INE-W977HD)
Audio output level
Preout (Front, Rear):
4V/10k ohms (max.)
Preout (Subwoofer):
4V/10k ohms (max.)