Manualsbrain.com
  1. Manuals
  2. Brands
  3. Alpine
  4. INE-W977HD
  5. Owner's Manual

Alpine INE-W977HD Owner's Manual

Download
Page of 252
48
-EN
Front Camera screen example
Side Camera screen example
4
Touch [
], [
], [ ] or [ ] to adjust the position of the 
guide.
• Touching [Clear] clears adjustments and returns to the setting 
before guide line alteration. 
5
After the adjustment is completed, touch [Set].
Adjusting Guides Simultaneously (for Rear/Side Camera 
only)
<Rear Camera>
1
Touch [Link].
The 3 vertical guides of the currently-selected guide link 
together, allowing them to be adjusted simultaneously.
When Hitch Guide is set to Off
• Note on the yellow guide line “
” in the center
The yellow guide line “
” in the center is controlled by a system that 
locates it in the center of the two yellow guide lines, “
” and “
” 
on the left and right, or the green line “
” on the top and red guide 
line “
” below. Therefore you cannot move it manually.
When Hitch Guide is set to On
<Side Camera>
1
Touch [Link].
The 2 vertical guides of the currently-selected guide link 
together, allowing them to be adjusted simultaneously.
Turning Guide Display On/Off (Rear/Front Camera only)
Turning the selected guide off.
1
Touch [On/Off].
The currently selected guide will turn off.
2
To turn the guide on, touch [On/Off] again.
• Guides that are turned off are still adjustable.
Returning Guides to Default
1
Touch [Default].
A message window will appear.
2
Touch [OK].
Adjusted values will return to default settings.
You can set whether to display the rear camera image when the gear 
lever is moved to the reverse (R) position while the unit is turned off.
You can select this item only when Camera Select is “Rear.”
Setting item:
Camera Interrupt (Power Mode)
Setting contents:
On (Initial setting) / Off
Camera Interrupt Setting (Power OFF Mode) 
(Rear Camera Only)
On:
The rear camera image is displayed
Off:
The rear camera image is not displayed