Alpine INE-W977HD Owner's Manual

-EN

When connecting the optional Multi Camera Interface module, you can
connect up to 3 cameras as Front Camera/Rear Camera/Side Camera.

• When using the optional Multi Camera Interface module, select

“Camera Selector” to set the “Front Camera /Rear Camera/Side
Camera” to “On” (

)/“Off ” (

Setting item:

Front Camera / Rear Camera / Side Camera / Default Camera*

Setting contents:

Off (Initial setting) / On

You can change the Default Camera only when you set more than one
camera for Front Camera/Rear Camera/Side Camera to “On.” For
details, see “Setting a Default Camera” (page 49).

Setting a Default Camera

When connecting an optional Multi View Camera, you can set which
camera image is displayed when you touch the Camera button on the
Menu screen or press the

(CAMERA) button (X209D only).

Setting item:

Default Camera

Setting contents:

Front / Rear / Side

• The initial setting differs depending on the cameras set to “On” in

“Setting Multi Camera to On/Off.”

Factory System Setup

[Factory System Setup]

is selected on the System Setup Menu screen in

step 1. See “System Setup” (page 46).

You can set whether the following source icon in the Menu screen is
available.

Setting item:

USB/iPod (Initial setting: Both) / SiriusXM (Initial setting: Aftermarket)

Setting contents:

Both / Factory / Aftermarket

USB/iPod only.

• The iDataLink source icons not displayed on the Menu screen when no

iDataLink module is connected even though “Both” or “Factory” is set.

• You cannot set the source that is currently being played.

Press and hold the

(Favorite) button for at least 2 seconds or touch

the Menu screen (page 22) to display the Info mode screen, and then set
the following.

Setting item:

Default Vehicle Screen

Setting contents:

Climate / Vehicle Info. / Gauges / Parking Assist / Last mode (Initial setting)

• Depending on the car, some setting contents or this setting item may not

be displayed.

You can change the setting of the connected iDataLink module.

Setting item:

Maestro Module

• Depending on the iDataLink module, the setting contents may differ.

Setting Multi Camera to On/Off

Camera
Signal:

See “Setting the Camera Signal Input” (page 47)

Guide
Adjustment:

See “Adjusting the Rear/Front/Side Camera Guide”
(page 47)

Camera
Interrupt
(Power Mode):

See “Camera Interrupt Setting (Power OFF Mode) (Rear
Camera Only)” (page 48)

Setting the Source Category

Both*:

Both the sources listed above from this unit and
iDataLink module are available.

Factory:

Only the source listed above from iDataLink module is
available.

Aftermarket:

Only the source listed above from this unit is available.

Setting the Default Vehicle Screen

Setting the Maestro Module