Alpine X108U Owner's Manual
33
-EN
*2
You can also make the setting in the Bal./Fad. screen.
For details on how to adjust, see “Setting the Balance/Fader/Rear
Speaker/Subwoofer” (page 33).
For details on how to adjust, see “Setting the Balance/Fader/Rear
Speaker/Subwoofer” (page 33).
*3
This setting is only available when “Subwoofer” is set to “On” (
).
*4
When the Defeat setting is “On,” you cannot perform the set up.
*5
When the Sound Setup of the Shortcut Setup is selected to ”BASS
ENGINE SQ,” you cannot perform the set up.
ENGINE SQ,” you cannot perform the set up.
*6
“Video” can be selected while a video is playing.
*7
The camera names are not displayed when Camera Select (page 46) is
set to “Off.”
set to “Off.”
1
Select the desired item.
2
To switch the setting, touch [ ], [ ], [
], [
], or mark the
checkboxes “Off” (
) or “On” (
).
• If “ ” appears, there is a further hierarchy. Touch the desired
item.
3
Touch [
] to return to the main source screen.
• To return to the previous List screen, touch [ ] or [ ] in the
previous page. For details, see “About Basic Operation for List
Screen” (page 18).
Screen” (page 18).
Sound Setup
[Sound]
is selected on the General Setup Menu screen in step 1. See
“General Setup” (page 32).
You can set up items related to the sound quality.
You can set up items related to the sound quality.
Set Balance/Fader/Rear Speaker/Subwoofer/Subwoofer Level/
Subwoofer Phase in the Bal./Fad. screen.
Subwoofer Phase in the Bal./Fad. screen.
Setting item:
Balance*
1
/ Fader*
1
/ Rear Speaker / Subwoofer*
2
/ Subwoofer Level*
1, 2
/
Subwoofer Phase*
1
*1
When selecting either of the above setting items, the Bal./Fad. screen is
displayed.
displayed.
*2
When the Sound Setup of the Shortcut Setup is selected to “BASS
ENGINE SQ,” you cannot perform the set up.
ENGINE SQ,” you cannot perform the set up.
Fad./Bal. screen
Enables you to change to each setting screen.
Balance/Fader Image area
Balance/Fader Image area
Setting the Balance/Fader
Touch the desired point within the image area. Or touch [
]
[
] [ ] [ ].
Balance:
L15 to R15
Fader:
F15 to R15
• To reset to the initial setting (Balance: 0, Fader: 0), touch [Center].
Rear Speaker Setting
You can set the rear speaker output to “Off.”
Setting item:
Rear Speaker
Setting contents:
On (Initial setting) / Off
Turning Subwoofer ON/OFF
If an optional subwoofer is connected to the unit, make the following
setting.
setting.
Setting item:
Subwoofer
Setting contents:
On / Off (Initial setting)
Adjusting the Subwoofer Level
You can set the Subwoofer level when a Subwoofer is connected.
Setting item:
Subwoofer Level
Setting contents:
0 to 15 (Initial setting: 0)
• This setting is only available when “Subwoofer” is set to “On” (
).
Setting the Subwoofer Phase
The subwoofer output phase is toggled Subwoofer Normal (0°) or
Subwoofer Reverse (180°).
Subwoofer Reverse (180°).
Setting item:
Subwoofer Phase
Setting contents:
0° (Initial setting) / 180°
• This setting is only available when “Subwoofer” is set to “On” (
).
The following steps 1 to 3 are common to each “Setting
item” of General Setup. See each section for details.
item” of General Setup. See each section for details.
Setting the Balance/Fader/Rear Speaker/
Subwoofer
Subwoofer