Pioneer AVH-3300NEX Owner's Manual

- 133 -

• The LCD screen should be used within 

the temperature ranges shown in 
Specifications on page 133.

• Do not use the LCD screen at 

temperatures higher or lower than the 
operating temperature range, because 
the LCD screen may not operate normally 
and could be damaged.

• The LCD screen is exposed in order to 

increase its visibility within the vehicle. 
Please do not press strongly on it as this 
may damage it.

• Do not push the LCD screen with 

excessive force as this may scratch it.

• Never touch the LCD screen with 

anything besides your finger when 
operating the touch panel functions. The 
LCD screen can scratch easily.

• If the LCD screen is near the vent of an air 

conditioner, make sure that air from the 
air conditioner is not blowing on it. Heat 
from the heater may break the LCD 
screen, and cool air from the cooler may 
cause moisture to form inside this 
product, resulting in possible damage.

• Small black dots or white dots (bright 

dots) may appear on the LCD screen. 
These are due to the characteristics of the 
LCD screen and do not indicate a 
malfunction.

• The LCD screen will be difficult to see if it 

is exposed to direct sunlight.

• When using a cellular phone, keep the 

antenna of the cellular phone away from 
the LCD screen to prevent disruption of 
the video in the form of disturbances 
such as spots or colored stripes.

• When removing dust from or cleaning 

the LCD screen, first turn this product off 

and then wipe the screen with a soft dry 
cloth.

• When wiping the LCD screen, take care 

not to scratch the surface. Do not use 
harsh or abrasive chemical cleaners.

A light emitting diode is used inside the 
display to illuminate the LCD screen.
• At low temperatures, using the LED 

backlight may increase image lag and 
degrade the image quality because of the 
characteristics of the LCD screen. Image 
quality will improve with an increase in 
temperature.

• The product lifetime of the LED backlight 

is more than 10 000 hours. However, it 
may decrease if used in high 
temperatures.

• If the LED backlight reaches the end of its 

product lifetime, the screen will become 
dimmer and the image will no longer be 
visible. In that case, please consult your 
dealer or the nearest authorized Pioneer 
Service Station.

General
Rated power source:

14.4 V DC (10.8 V to 15.1 V allowable)

Grounding system:

Negative type

Maximum current consumption:

10.0 A

Dimensions (W × H × D):

DIN
Chassis:

178 mm × 50 mm × 160 mm (7 in. × 2 
in. × 6-1/4 in.)

Nose:

188 mm × 58 mm × 32 mm (7-3/8 in. × 
2-1/4 in. × 1-1/4 in.)