JVC KD-X33MBS Owner's Manual

ENGLISH

27

General

Sound cannot be heard.

•  Adjust the volume to the optimum level.
•  Check the cords and connections.

“MISWIRING CHECK 
WIRING THEN PWR ON” 
appears.

  Turn the power off, then check to be sure the terminals of 

the speaker wires are insulated properly. Turn the power 
on again.

“PROTECTING SEND 
SERVICE” appears.

  Send the unit to the nearest service center.

Source cannot be selected.   Check the [SRC SELECT] setting. (  4)

Radio

•  Radio reception is poor.
•  Static noise while 

listening to the radio. 

  Connect the antenna firmly.

USB / iPod

Playback order is not as 
intended.

  The playback order is determined by the file name.

Elapsed playing time is 
not correct.

  This depends on the recording process earlier.

“NOT SUPPORT” appears 
and file skips.

  Check whether the file is a playable format. (  25)

“READING” keeps flashing. •  Do not use too many hierarchical levels and folders.

•  Reattach the USB device.

“CANNOT PLAY” flashes 
and/or connected device 
cannot be detected.

•  Check whether the connected device is compatible with this 

unit and ensure the files are in supported formats. (  25)

•  Reattach the device.

The iPod/iPhone does not 
turn on or does not work.

•  Check the connection between this unit and iPod/iPhone.
•  Detach and reset the iPod/iPhone using hard reset.

Correct characters are not 
displayed.

•  This unit can only display uppercase letters, numbers, and 

a limited number of symbols.

•  Depending on the display language you have selected 

(  4), some characters may not be displayed correctly.

 

ANDROID

•  Sound cannot be heard 

during playback.

•  Sound output only from 

the Android device.

•  Reconnect the Android device.
•  If in [AUDIO MODE], launch any media player 

application on the Android device and start playback.

•  If in [AUDIO MODE], relaunch the current media player 

application or use another media player application.

•  Restart the Android device.
•  If this does not solve the problem, the connected Android 

device is unable to route the audio signal to unit. (  25)

Cannot playback at 
[AUTO MODE].

•  Make sure JVC MUSIC PLAY APP is installed on the 

Android device. (  7)

•  Reconnect the Android device and select the appropriate 

control mode. (  8)

•  If this does not solve the problem, the connected Android 

device does not support [AUTO MODE]. (  25)

“NO DEVICE” or “READING” 
keeps flashing.

•  Switch off the developer options on the Android device.
•  Reconnect the Android device.
•  If this does not solve the problem, the connected Android 

device does not support [AUTO MODE]. (  25)

Playback is intermittent or 
sound skips.

  Turn off the power saving mode on the Android device.

“CANNOT PLAY”

•  Make sure Android device contains playable audio files.
•  Reconnect the Android device.
•  Restart the Android device.

JS_JVC_KD_X330BTS_X33MBS_K_EN_1.indd   27

29/9/2015   3:55:41 PM