Manualsbrain.com
  1. Manuals
  2. Brands
  3. JVC
  4. KD-X33MBS
  5. Owner's Manual

JVC KD-X33MBS Owner's Manual

Download
Page of 42
ENGLISH
29
TROUBLESHOOTING
Symptom
 Remedy
Bluetooth®
“PAIRING FULL”
  The number of registered devices has reached its limit. 
Retry after deleting an unnecessary device. (  18, DELETE 
PAIR)
“PLEASE WAIT”
  The unit is preparing to use the Bluetooth function. If the 
message does not disappear, turn off and turn on the unit, 
then connect the device again.
“BT DEVICE NOT 
FOUND”
  The unit failed to search for the registered Bluetooth 
devices during [AUTO CNNCT]. Turn on Bluetooth from 
your device and connect manually. (  18)
“NOT SUPPORT”
  The connected phone does not support Voice Recognition 
feature.
“ERROR”
  Try the operation again. If “ERROR” appears again, check if 
the device supports the function you have tried.
“H/W ERROR”
  Reset the unit and try the operation again. If “H/W ERROR” 
appears again, consult your nearest service center.
If you have any troubles, try the following:
1 Check 
TROUBLESHOOTING
2  Reset the unit (  3)
3  Contact (USA only)
 
Call:  1-800-252-5722  ( or )  visit:  http://www.jvc.com
Symptom
 
Remedy
Bluetooth®
No Bluetooth device is 
detected.
•  Search from the Bluetooth device again.
•  Reset the unit. (  3)
Pairing cannot be made.
•  Make sure you have entered the same PIN code to both 
the unit and Bluetooth device.
•  Delete pairing information from both the unit and the 
Bluetooth device, then perform pairing again. (  14)
Echo or noise occurs.
•  Adjust the microphone unit’s position. (  14)
• Check the [ECHO CANCEL] setting. (  16)
Phone sound quality 
is poor.
•  Reduce the distance between the unit and the Bluetooth 
device.
•  Move the car to a place where you can get a better signal 
reception.
Sound is being 
interrupted or skipped 
during playback of a 
Bluetooth audio player.
•  Reduce the distance between the unit and the Bluetooth 
audio player.
•  Turn off, then turn on the unit and try to connect again.
•  Other Bluetooth devices might be trying to connect to 
the unit.
The connected Bluetooth 
audio player cannot be 
controlled.
•  Check whether the connected Bluetooth audio player 
supports Audio/Video Remote Control Profile (AVRCP). 
(Refer to the instructions of your audio player.)
•  Disconnect and connect the Bluetooth player again.
JS_JVC_KD_X330BTS_X33MBS_K_EN_1.indd   29
29/9/2015   3:55:42 PM