Crown XLS 2002 Owner's Manual

A theater 2.1 sound amplification system can be easily set up using one amplifier in STEREO mode for the L and R channels and a second amplfier in BRIDGE mode with a 
Low Pass filter set to the appropriate cutoff frequency.

1.     Configure the system as described in Input-Y section on page 8. The 

woofer connected to Channel 1 and the mid/high drivers to Channel 2.

2.     Set up Channel 1 as a Low Pass filter and use your crossover frequency as 

the filter's cutoff frequency.

3.     Set up Channel 2 as a High Pass filter using the same filter cutoff 

frequency as in Step 2 above.