Garmin Approach® G10 Owner's Manual

See the Important Safety and Product Information guide in the 

product box for product warnings and other important 

information.

À

Select to scroll through menus, holes, and settings.
Hold to turn the device on and off.

Á

Select to scroll through menus, holes, and settings.

Â

OK

Select to select menu options and acknowledge messages. 
During play, select to open in-game features.

Ã

BACK Select to return to the previous menu.

The first time you turn on the device, you are prompted to 

configure system settings.

Hold  .

Follow the on-screen instructions.

Battery status

Sunrise

Sunset

This device contains a lithium-ion battery. See the Important 

Safety and Product Information guide in the product box for 

product warnings and other important information.

To prevent corrosion, thoroughly clean and dry the contacts and 

the surrounding area before charging or connecting to a 

computer. Refer to the cleaning instructions in the appendix.

Plug the USB cable into a USB port on your computer.

Align the charger posts with the contacts on the back of the 

device, and connect the charging clip 

À

 securely to the 

device.

Charge the device completely.

Press 

Á

 to remove the charger.

Before you can play golf, you must wait until the device acquires 

satellite signals, which may take 30 to 60 seconds.

Select Start Round.
The device locates satellites and calculates your location.

Select a course from the list.

Follow the on-screen instructions to complete the setup and 

start a round.

The device shows the current hole you are playing, and 

automatically transitions when you move to a new hole.
NOTE: By default, the device calculates the distance to the 

front, middle, and back of the green. If you know the location of 

the pin, you can set it more precisely (

).

À

Current hole number.

Á

Distance to the pin location.

Â

Distance to the back of the green.

Ã

Distance to the front of the green.

Ä

Approximate view of the green. The pin position is indicated with +.

Å

Par for the hole.

You can take a closer look at the green and move the pin 

location.

While playing golf, select OK.

Select Move Flag.

Select   or   to move the pin position.

Select OK.

While playing golf, select OK.

Select Measure Shot.

Walk to your ball.
TIP: You can select   to reset the measurement.

You can view distances to hazards along the fairway for par 4 

and 5 holes. Hazards that affect shot selection are displayed 

individually or in groups to help you determine the distance to 

layup or carry.

While playing golf, select OK.

Select Hazards.

Getting Started

1