ONKYO TX-RZ610 Owner's Manual

Troubleshooting | Appendix

The unit allows you to configure advanced settings to provide you with an even better 

experience.

Operation:

Use the on-screen displays (OSD) that appear on the TV to make the settings.

Press   on the remote controller to display the Setup menu.

Setup

1. Input/Output Assign 
2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Multi Zone
7. Miscellaneous

1. TV Out / OSD
2. HDMI Input
3. Video Input
4. Digital Audio Input
5. Analog Audio Input

Select the item with the cursor  /  buttons of the remote controller and press ENTER to 

confirm your selection.

Use the cursors  /  to change the default values.

•  To return to the previous screen, press  .

•  To exit the settings, press  .

Make settings related to output to the TV, change the settings for jack allocations to the 

various input selectors, and set the feature for displaying operations on the TV (OSD), etc.

■ 1� TV Out / OSD

HDMI Out

MAIN

Select the HDMI jack to be connected with the TV.

"MAIN": When connecting the TV to the HDMI OUT 

MAIN jack

"SUB": When connecting the TV to the HDMI OUT 

SUB jack

"MAIN+SUB": When connecting to both the MAIN 

and SUB jacks

1080p -> 4K 

Upscaling

Off

When using a TV that supports 4K, video signals 

input at 1080p can be automatically upscaled to 4K 

for output.

"Off": Do not use this function

"Auto": Use this function

•  Select "Off" if your TV does not support 4K.

Super Resolution (2)

When you have set "1080p -> 4K Upscaling" to 

"Auto", you can select the degree of video signal 

correction from "Off" and between "1" (weak) and 

"3" (strong).

OSD Language

English

Select the on-screen display language from the 

following.

English, German, French, Spanish, Italian, Dutch,

Swedish

Impose OSD

On

Set whether or not to display the information on 

the TV when the volume is adjusted or input is 

changed, for example.

"On": OSD displayed on the TV

"Off": OSD not displayed on the TV

•  OSD may not be displayed depending on the 

input signal even if "On" is selected. If the 

operation screen is not displayed, change the 

resolution of the connected device.