ONKYO TX-RZ610 Owner's Manual

|

•  Try plugging/unplugging the power of the unit and try 

turning on/off the BLUETOOTH enabled device. Re-

startup of the BLUETOOTH enabled device may be 

effective.

•  The BLUETOOTH enabled devices must support the 

A2DP profile.

•  Near components such as microwave oven or cordless 

phone, which use the radio wave in the 2.4 GHz range, 

a radio wave interference may occur, which disables the 

use of this unit.

•  If there is a metallic object near the unit, BLUETOOTH 

connection may not be possible as the metal can effect 

on the radio waves.

Check the following if the above does not fix the problem:

■ Cannot connect with this unit

•  Check that the BLUETOOTH function of the 

BLUETOOTH enabled device is enabled.

■ Music playback is unavailable on the unit even after 

•  When the audio volume of your BLUETOOTH enabled 

device is set low, the playback of audio may be 

unavailable. Volume up the BLUETOOTH enabled 

device.

•  Depending on the BLUETOOTH enabled device, Send/

Receive selector switch may be provided. Select Send mode.

•  Depending on the characteristics or specifications of 

your BLUETOOTH enabled device, playback on the unit 

is not guaranteed.

■ Sound is interrupted

•  Problem may be occurring at the BLUETOOTH enabled 

device. Check the information on the internet.

■ The audio quality is poor after connection with a 

The BLUETOOTH reception is poor. Move the 

BLUETOOTH enabled device closer to the unit or 

remove any obstacle between the BLUETOOTH 

enabled device and this unit.

•  If you cannot select a network service, it will become 

selectable when the network function is started. It may 

take about a minute to start up.

•  When NET is blinking, this unit is not properly 

connected to the home network.

•  Try plugging/unplugging the power supply of this unit 

and the router, and try rebooting the router.

•  If the desired wireless LAN router is not in the access 

point list, it may be set to hide SSID or the ANY 

connection may be off. Change the setting and try again.

Check the following if the above does not fix the problem:

■ Cannot access the Internet radio

•  Certain network service or contents available through 

the unit may not be accessible in case the service 

provider terminates its service.

•  Make sure that your modem and router are properly 

connected, and make sure they are both turned on.

•  Make sure that the LAN side port on the router is 

properly connected to this unit.

•  Make sure that connecting to Internet from other 

components is possible. If connecting is not possible, 

turn off all components connected to the network, wait 

for a while, and then turn on the components again.

•  If a specific radio station is unavailable for listening, make 

sure the registered URL is correct, or whether the format 

distributed from the radio station is supported by this unit.

•  Depending on ISP, setting the proxy server is 

necessary.

•  Make sure that the used router and/or modem is 

supported by your ISP.

■ Cannot access the network server

•  This unit needs to be connected to the same router as 

the network server.

•  This unit is compatible with Windows Media

R

 Player 11 

or 12 network servers or NAS that are compatible with 

home network functionality.

•  You may need to make some settings on Windows 

Media

R

 Player. Check in "Music Server" in "Playback 

Function" in the Advanced Manual.

•  When using a PC, only music files registered in the 

Windows Media

R

 Player library can be played.

■ Playback stops while listening to music files on the 

•  Make sure the network server is compatible with this 

unit.

•  When the PC is serving as the network server, try 

quitting any application software other than the server 

software (Windows Media

R

 Player 12, etc.).

•  If the PC is downloading or copying large files, the 

playback may be interrupted.

■ USB storage device is not displayed

•  Check whether the USB storage device or USB cable is 

correctly inserted to the USB port of the unit.

•  Disconnect the USB storage device from the unit, and 

then try reconnecting.

•  Performance of the hard disk that receive power from 

the USB port of the unit is not guaranteed.

•  Depending on the type of format, the playback may 

not be performed normally. Check the type of the file 

formats that is supported.

•  USB storage devices with security functions may not be 

played.