Manualsbrain.com
  1. Manuals
  2. Brands
  3. Yamaha
  4. AVENTAGE RX-A1070
  5. Owner's Manual

Yamaha AVENTAGE RX-A1070 Owner's Manual

Download
Page of 205
En
130
HDMI
Configures the HDMI settings.
■
HDMI Control
Enables/disables HDMI Control (p.165).
Settings
Y
To use HDMI control, you need to perform the HDMI Control link setup (p.165) after connecting HDMI 
Control-compatible devices.
TV Audio Input
Selects an audio input jack of the unit to be used for TV audio input when “HDMI Control” is set 
to “On”. The unit’s input source automatically switches to TV audio when the TV input is 
switched to its built-in tuner.
Settings
AUDIO 1-3
Default
AUDIO 1
Y
When using ARC to input TV audio to the unit, you cannot use the input jacks selected here for connecting an 
external device because the input will be used for TV audio input.
ARC
Enables/disables ARC (p.167) when “HDMI Control” is set to “On”.
Settings
Y
You do not need to change this setting normally. In case noises are produced from the speakers connected to the 
unit because TV audio signals input to the unit via ARC are not supported by the unit, set “ARC” to “Off” and use 
the TV’s speakers.
Standby Sync
Select whether to use HDMI control to link the standby behavior of the TV and the unit when 
“HDMI Control” is set to “On”.
Settings
■
Audio Output
Selects a device to output audio.
X
• The  “HDMI OUT1” setting is available only when “HDMI Control” is set to “Off”.
• The  “HDMI OUT2” setting is available only when “HDMI OUT2 Assign” (p.136) is set to “Main”.
HDMI OUT1, HDMI OUT2
Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 
2 jack.
Settings
Y
The HDMI OUT 1-2 jacks output 2-channel audio signals when the unit is turned on.
Off
Disables HDMI Control.
On
Enables HDMI Control.
Configure the settings in “TV Audio Input”, “ARC” and “Standby Sync”.
Off
Disables ARC.
On
Enables ARC.
Off
Does not set the unit to standby mode when the TV is turned off.
On
Sets the unit to standby mode when the TV is turned off.
Auto
Sets the unit to standby mode when the TV is turned off only when the unit is 
receiving TV audio or HDMI signals.
Off
Disables the audio output from the TV.
On
Enables the audio output from the TV.