Yamaha AVENTAGE RX-A1070 Owner's Manual

En

■

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in 

standby mode. If this function is set to “On” or “Auto”, you can use the input selection keys (AV 

1-7 and V-AUX) to select an HDMI input even when the unit is in standby mode (the standby 

indicator on the unit blinks).

Network

Configures the network settings.

■

Network Connection

Selects the network connection method.

■

IP Address

Configures the network parameters (such as IP address).

DHCP

Select whether to use a DHCP server.

Off

(This setting is available only when “HDMI Control” is set to “Off”.)

Does not output videos/audio to the TV.

On

Outputs videos/audio to the TV. 
(The unit consumes more power than when “Off” is selected.)

Auto

Outputs videos/audio to the TV. If no signals are detected, the unit is set to the 
power saving mode.

Wired

Select this option when you want to connect the unit to a network with a 
commercially-available network cable (p.39).

Wireless (Wi-Fi)

Select this option when you want to connect the unit to a network via the wireless 
router (access point). For details on settings, see “Connecting the unit to a 
wireless network” (p.52).

Wireless Direct

Select this option when you want to connect a mobile device to the unit directly. 
For details on settings, see “Connecting a mobile device to the unit directly 
(Wireless Direct)” (p.57).

Off

Does not use a DHCP server. Configure the network parameters manually. For 
details, see “Manual network settings”.

On

Uses a DHCP server to automatically obtain the unit’s network parameters (such 
as IP address).